SDM-2009

SDM-2009 Docking Station

Automated Docking and Calibration Station for the GX-2009

RKI’s new SDM-2009 calibration station for the GX-2009 is available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration. It can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2009 stations to charge, calibrate, and bump test 10 instruments simultaneously.

Category: ,

Tags:

Stand Alone Station

  • Stand-alone station (no PC Required)
  • Charging
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to a USB jump drive
  • Includes PC software for viewing/ archiving bump test and calibration records

Multi-Module System

  • Multiple modules connected to a PC (10 max)
  • Charging
  • Calibration
  • Bump Test
  • Automatic calibration/bump test option
  • Configure GX-2009 parameters
  • Archive Bump Test and Calibration records
  • Archive data to a network location
  • Software controlled data retrieval
  • Windows 7 compatible

  • Input Power: 12 VDC (NOTE: AC Adapter with 100 – 240 VAC, 50/60 Hz,0.6A input and 12 VDC, 1.2A output provided as standard.)
  • Environmental Conditions: For Indoor Use Only
  • Operation Temperature: -10° C to 40° C
  • Humidity: below 80% Relative Humidity, Non-Condensing
  • Applicable Instruments: GX-2009
  • Maximum Number of Records Saved: 200 (stand-alone). Unlimited with software
  • Ports: 3 Ports (1 Calibration gas; 1 fresh air; 1 exhaust)
  • Standard Accessories
    • AC Adapter
    • USB Flash Drive
    • Single Module Data Viewer Software
    • SDM-03 Docking Station PC Controller Program
    • Inlet Air Filter
    • Instruction Manual
    • 10 Foot Long Exhaust Tube
    • One 3 Foot Long Tube for GAS Fitting
    • 2 T-Fittings (for PC Controlled Configuration only)
    • 10 Foot Long 3/16 Inch Tube for GAS manifolding (used for PC Controlled Configuration only)
    • Check Valve (used for PC Controlled Configuration only)
    • USB Cable, Type A to Type B