MultiRAE Benzene

MultiRAE Benzene

The MultiRAE Benzene monitor combines the ability to make quick benzene-specific assessment (“snapshot”) measurements with the advantages of a versatile multi-gas monitor that can support approximately 20 intelligent interchangeable sensor options. Its optional wireless capability improves safety by providing real-time access to instrument readings and alarm status from any location, which delivers better situational awareness and faster incident response in a wide range of different applications.

Category: , ,

Tags: , ,

  • Optional integrated wireless
  • Snapshot Benzene specific measurement capability
  • 20 field-interchangeable sensor options, including PID, LEL, and exotics
  • Five local and remote alarms, including man down
  • Dust-tight and waterproof (IP65-rated)
  • Rugged design
  • Long battery run-time
  • Intuitive, icon-driven interface
  • Flippable screen
  • Large buttons for easy navigation even with up to three glove layers
  • Continuous data logging — six months for five sensors 24/7
  • Fully automated bump testing and calibration with AutoRAE 2
  • Device Management with Honeywell Sotera™ Express
  • Size: 7.6 x 3.8 x 2.6 in. (193 x 96.5 x 66 mm) without RAE SepTube Catridge
  • Weight: 31 oz (880g) without RAE SepTube Catridge
  • Operating Temperature: -4° to 122° F (-20° to 50° C)
  • Humidity: 0% to 95% relative humidity
  • Battery Options:
    • Rechargeable Li-ion
    • Extended duration Li-ion
    • Alkaline adapter w/4 AA Batteries
  • Operating Hours:
    • Rechargeable: 12 hr. run time
    • Extended: 18 hr. run time
    • Alkaline: 6 hr. run time
  • Alarms:
    • Wireless remote alarm notification
    • Audible: 95dB @ 30cm
    • Vibration
    • Visible (Flashing bright red LEDs)
    • On-screen notifcation of alarm conditions
    • Man Down Alarm with pre-alarm and real-time remote wireless notification
  • IP Rating: !P-65, unit running
  • Datalogging:
    • Continuous (6 months for 5 sensors at one-minute intervals)
    • Snapshot datalogging
  • Sampling Pump: Built in pump; Average flow rate: 250 cc/min.
  • Low Flow Alarm: Auto shut-off pump at low-flow condition
  • Warranty:
    • 2 years on non-consumable components and catalytic LEL, CO, H2S and O2 sensors
    • 1 year on all other sensors, pump, battery and other consumables
    • 6 months on PID sensor
Sensor Type Measuring Range Resolution
VOC 9.8 eV 0 – 2000 ppm 0.1 ppm
Benzene-specific Snapshot 0 – 200 ppm 0.1 ppm
LEL (catalytic) 0 – 100% LEL 1% LEL
NH3 0 – 100 ppm 1 ppm
CO 0 – 500 ppm 1 ppm
CO (Ext. Range) 0 – 2000 ppm 10 ppm
CO (H2 Comp.) 0 – 2000 ppm 10 ppm
CO+H2S Combo 0 – 500 ppm CO; 0 – 200 ppm H2S 1 ppm CO; 0.1 ppm H2S
Cl2 0 – 50 ppm 0.1 ppm
ClO2 0 – 1 ppm 0.03 ppm
EtO-A 0 – 100 ppm 0.5 ppm
EtO-B 0 – 10 ppm 0.1 ppm
HCHO 0 – 10 ppm 0.05 ppm
HCN 0 – 50 ppm 0.5 ppm
H2S 0 – 100 ppm 0.1 ppm
CH3-SH 0 – 10 ppm 0.1 ppm
NO 0 – 250 ppm 0.5 ppm
NO2 0 – 20 ppm 0.1 ppm
O2 0 – 30% 0.1%
PH3 0 – 20 ppm 0.1 ppm
SO2 0 – 20 ppm 0.1 ppm