Multi Gas Clip Simple Plus
Multi Gas Clip Simple Plus
3-year battery life. No charging ever!
The newest member of GasClip Technologies’ gas detector family, the Multi Gas Clip Simple Plus, features no charging ever and no calibrating necessary. It’s SIMPLE to use! A continued refinement of their advanced low-power photometric infrared technology for combustible gas (LEL) measurement helps make gas detection simpler and safer than ever.
Now you can reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-maintain detector. Just turn it on and have worry-free assurance of protection against toxic gases 24/7 for a full three years.
Note: The IR sensor can detect hydrocarbons. It cannot detect hydrogen or acetylene.
Category: GasClip Technologies, Multi-Gas
Tags: Disposable
- 3-year run time - 3-year life!
- 3-year warranty. For any service, please contact our service center.
- No charging ever! No calibration is necessary!
- Large, easy-to-read screen
- Simple One Button Operation
- Works in oxygen enriched and oxygen deficient environments
- Continuous 1-second data logging
- LEL sensor is immune to H2S & silicone poison
- Assembled in USA
- Compatible with MGC Simple Dock or MGC Simple Wall Mount Dock
- Dimensions: 4.75 H x 2.75 W x 1.25 D inches (120.65 x 69.85 x 31.75 mm)
- Weight: 7.675 oz. (220.2 g)
- Temperature: -4 ̊ to +122 ̊F (-20 ̊ to +50 ̊C)
- Humidity: 5% to 95% RH (non-condensing)
- Battery Life: 1095 Days continuous (based on avg. of 1 minute of alarm/day)
- Alarms: Visual, vibrating & audible (minimum 95 dB); Low, High, STEL, TWA & OL (Over Limit)
- LEDs: 4 Red alarm bar LEDs; Yellow back-light (activated on button press); Red back-light (activated on alarm condition); Yellow maintenance notification LED
- Display: High viewing angle alphanumeric Liquid Crystal Display (LCD)
- Logs: 50 Bump tests, 50 events, 50 calibrations; Continuous 1 second data logging (typical capacity > 2 months)
- Tests: Full function self-test upon activation
Sensors, battery and circuitry tests run continuously - User Options:
- Custom user message
- TWA/STEL intervals
- Languages (6)
- Latching alarms
- Self-test lock
- Bump test interval
- Low/High alarm Maintenance notification
- TWA method
- Sensor enable/disable
- SAFE display
- Dock lock
- Calibration gas concentration
- Calibration interval
- TWA/STEL alarm
- % LEL or % CH4 by-vol
| Sensor Type | Measuring Range | Resolution |
|---|---|---|
| H2S | 0 - 100 ppm | 0.1 ppm |
| CO | 0 - 500 ppm | 1 ppm |
| LEL | 0 - 100% LEL | 0.1% |
| O2 | 0 - 30% | 0.1% |
