Honeywell BW Solo

Honeywell BW Solo

Honeywell BW Solo is an easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents.

Available Gases:

  • H2S
  • CO
  • O2
  • NH3
  • SO2
  • HCN
  • Cl2
  • NO
  • NO2
  • PH3
  • ETO
  • ClO2
  • O3
  • H2
  • User-friendly operation
  • Easy-to-read display for multiple languages
  • Lightweight convenience
  • Option to activate IntelliFlash™ or non-compliance flash
  • Ability to assign detectors to workers and locations
  • Data logging with rolling 24-hour peak reading
  • Ease of maintenance – no need to take it apart to replace sensors, batteries and sensor filters
  • The new 1-Series sensor for enhanced reliability
  • Connected Bluetooth Low Energy (BLE) capabilities
  • High standards of sensor quality and reliability
  • The easiest single-gas detector to service
  • The first single-gas detector with the 1 Series sensor for CO, H2S, and O2
  • Complete with an extensive selection of sensor options
  • Compatible with IntelliDoX
  • Size:
    • 2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models)
    • 2.7 x 2.6 x 1.6 in. / 7.0 x 6.7x 4.1 cm (4-Series sensor models)
  • Weight: 3.6 to 4.1 oz. / 103 to 116 g, depending on the installed sensor
  • Humidity: 0% – 95% RH (non-condensing)
  • Alarms: Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, non-compliance
  • Tests:
    • Sensor integrity
    • Circuitry
    • Battery (Continous)
    • Audible/visual alarms on activation
  • Ingress Protection: IP66/68
  • Typical battery life: 12 months (6 months for 1-Series O2)
  • User options:
    • • Reset TWA, STEL and Peak readings
    • Change High, Low, TWA and STEL alarm setpoints
    • Latching alarms
    • Enable IntelliFlash and non-compliance indicators
    • Set calibration and/or bump test reminders
    • Assign worker and location assignments
    • Calibration past due lockout
  • Warranty:
    • 3 years for 1-Series detectors and sensors (H2S, CO, O2)
    • 2 years for 4-Series detectors and sensors
    • 1 year for NH3, Cl2, O3, ETO, ClO2 sensors
Sensor Type Measuring Range Resolution
H2S (1Series) 0 – 200 ppm 0.1 ppm
CO (1Series) 0 – 2000 ppm 1 ppm
O2S (1Series) 0 – 30% v/v 0.1% v/v
Cl2 (4Series) 0 – 50 ppm 0.1 ppm
ClO2 (4Series) 0 – 1 ppm 0.01 ppm
CO-H (4Series) 0 – 2000 ppm 0.5 ppm
ETO (4Series) 0 – 100 ppm 0.1 ppm
H2 (4Series) 0 – 1000 ppm 2 ppm
H2S Ext. Range (4Series) 0 – 500 ppm 0.1 ppm
HCN (4Series) 0 – 100 ppm 0.1 ppm
NH3 (4Series) 0 – 100 ppm 1 ppm
NH3 Ext. Range (4Series) 0 – 400 ppm 1 ppm
O3 (4Series) 0 – 1 ppm 0.01 ppm
PH3 (4Series) 0 – 5 ppm 0.1 ppm
SO2 (4Series) 0 – 100 ppm 0.1 ppm
H2S (4Series) 0 – 100 ppm 0.1 ppm
CO (4Series) 0 – 1000 ppm 1 ppm
O2 (4Series) 0 – 30% v/v 0.1% v/v