HazMat Simultest Kit

Dräger HazMat Simultest Kit

The Dräger HazMat Simultest Kit is designed to quickly determine the presence of inorganic and organic gases and vapours. Each set consists of five tube sets, each capable of detecting a different type of toxic substance. The Simultaneous Test Sets I, II & III are used to detect toxic substances generated from burning combustible materials, flammable liquids or flammable gases and substances evolving from a chemical leak or spill.

The HazMat Simultest Kit is ready for use in emergency response situations. The measurement procedure is the same for each set, minimizing training. Laminated full-colour instruction cards provide a quick reference on the simple sampling procedures, and accurate interpretation of results, for both the field and laboratory.

Category: ,


  • Up to 50% Time Savings
    • Prepackaged sets of 5 tubes. Air is drawn through the 5 tubes simultaneously using the Dräger 5 tube manifold. The time to draw the air sample is less than 1 minute as
      compared to approximately 10 minutes using individual tubes.
  • Qualifying Gases and Vapours
    • Sets I and II are dedicated to inorganic gases and Set III is for organic vapours.
    • Set III quickly identifies the presence of ketones, aromatics, alcohols, aliphatics and chlorinated hydrocarbons.
  • Reliable Performance
    • Environmental factors influence reduced to a minimum, ensuring reliable measurements under the toughest environmental conditions.
    • Contents are securely packaged in a rugged Pelican case.
  • No Calibration
  • Easy-to-Use
    • Ready for immediate use in emergency situations
    • Reduced training by utilizing the same measurement procedure
    • Full-colour instruction cards