ALTAIR® Pro
ALTAIR® Pro
Based on the industry-standard ALTAIR® Single-Gas Detector—but with added features and functionality — ALTAIR® Pro toxic gas and oxygen detectors combine reliable detection and LED/audible/flashin/vibrating alarms with clear, backlit LCD displays.
Available Gases:
- CO
- H2S
- O2
- NH3
- Cl2
- ClO2
- NO2
- SO2
- HCN
- PH3
- Tough rubberized housing
- One-button operation
- Accurately measures gas concentration or percent oxygen
- Displays information on a large, clear, backlit LCD.
- Superior dust and water protection (rated IP67 except for O2-R)
- Event-logging and data-logging
- Excellent impact resistance
- Adjustable alarm set points are offered for LOW, HIGH, TWA, and STEL
- Alarms are indicated by flashing LEDs, audible alarm and internal vibrating alarm
- Replaceable battery and sensor
- Size: 3.4″ x 2.0″ x 1.0″
- Weight: 4.0 oz including clip
- Operating Temp. Range: -20 ̊C to +50 ̊C (-4 to +122 ̊F)
- Humidity: 10-95% RH non-condensing
- Warranty: See instruction manual for full warranty information
- Instrument Life: Indefinite with sensor and battery replacement as needed
- Battery: CR2 lithium camera battery (9000 hour installed life – typical)
- Case: Polycarbonate with rubberized shell
- Display: Large LCD with backlight
- Humidity: 10-95% RH non-condensing
- Ingress Protection: IP67 (except O2-R is IP54)
- Datalogging: 50 latest events in session log. Peak value every 3 minutes in periodic log
| Sensor Type | Measuring Range | Resolution |
|---|---|---|
| H2S | 0 – 200 ppm | 1 ppm |
| CO | 0 – 1500 ppm | 1 ppm |
| HCN | 0 – 30 ppm | 0.5 ppm |
| O2 | 0 – 25% | 0.1% |
| CL2 | 0 – 20 ppm | 0.1 ppm |
| ClO2 | 0 – 1.00 ppm | 0.02 ppm |
| SO2 | 0 – 20 ppm | 0.1 ppm |
| NO2 | 0 – 20 ppm | 0.1 ppm |
| NH3 | 0 – 100 ppm | 1 ppm |
| PH3 | 0 – 5.00 ppm | 0.05 ppm |
| O2-R | 0 – 25% | 0.1% |
