• Fully encapsulating suit for maximum space protection
• Wide front entry on the left side for easy donning & doffing
• Zipper fastener (bottom-up)
• Double-flap zipper protection
• Flexible and foldable two-layer visor offers an almost natural field of vision
• Integrated gas-tight socks with boot flaps for use with multiple boot sizes
• Fixed gloves combine butyl outer with laminate inner lining for increased protection against chemicals and punctures
• Kevlar over-glove for additional cut protection
• Integrated waist belt for size adjustment
• Optional with connector for external air supply to extend decontamination phase

Dräger CPS 5900 Datasheet

• Equipment and Training enabling you to
  • Develop a progressive live firefighter training curriculum
  • Minimize risk
  • Replicate real-world scenarios
  • Control training costs
• Features of the Swede System
  • Develop a progressive live firefighter training curriculum based in part on our published curriculum for each individual simulator
  • Control training costs
  • Replicate Modern Fire Behavior
  • Achieve multiple NFPA training competencies through a field-proven curriculum
  • Recognize and observe fire behaviour and conditions in a safe and controlled environment
• Curriculum includes:
  • Ignition sources
  • Fire behaviour
  • Formation of fire gases
  • Fire control
  • Container operations
  • Hydraulic ventilation
  • Smoke and ventilation exercises
  • Nozzle technique
  • Smoke conditions recognition
  • Container management
  • Overall safety

Dräger Swede Survival - Product Information

Dräger Swede Survival - Phase 1 - Product Information

Dräger Swede Survival - Phase 2 - Product Information

Dräger Swede Survival - Phase 4 - Product Information

Dräger Swede Survival - Phase 5 - Product Information

Dräger Swede Survival - Phase 6 - Product Information

Live Fire Training Solutions

• Realistic fire simulation
• Customer-specific solutions (selection of typical fire scenarios includes: Kitchen, Bed/couch, Multiprop (various props available), Wall fire, Rollover
• Easily transportable
• Safety devices for gas and temperature monitoring in accordance with relevant NFPA and CSA codes
• Accessible roof of the fire simulation trainer can also be used as an extended training area
• DOT-compliant propane cylinders

• Gas Detection; Temperature Sensing; Flame Control for Pilot Burners; Monitored Ventilation System; Emergency Stops; Deadman Switch; Water Bath Protected Components; PLC Controlled System; Burner Management System: CAN/CSA B149.3 and NFPA 86

Training Area

• Approx. 300 sq.ft incl. props; Up to 2 Simulators; 1 x Rollover Simulator; 2 x Access Doors w/Stairs; 2 x Windows Latched w/Shutters; 1 x Roof Hatch; 1 x Stairwell to Roof; 1 x Vertical Removable Ladder

Structure

• Heavy Gauge Steel for Props; Steel Lining on Walls and Ceiling; Sacrificial Plates for Heat Shielding; Ceramic Insulation Rated to 2,300ºF (649ºC); Chassis Galvanized w/Structural Steel

Equipment

• 12 kW (max) Rated Generator; 2 x Propane Cylinders (DOT Compliant); Smoke Generator and Smoke Fluid Reservoir; 2 x Air Intake Fans w/Automated Control

Recognized Standards

• NFPA 1402 and 1403
• UL 508
• UL 147 (as applicable)
• NFPA 86 (as applicable)

Dräger Mobile Live Fire Training Unit Product Information

Live Fire Training Solutions

• Different mock-ups are available: Wastebasket, Electric motor, Flammable storage locker, Range top
• Manufactured using polished stainless steel
• Tethered remote control and an emergency cut-off
• Factory approval of CSA International

• Dimensions: 26 x 47 x 16 inches (66 cm x 119 cm x 41 cm)
• Weight: 65 lbs (29.5 kg)
• Flame Area: 6.2 sq ft (.58 sq m) approx.
• Fabrication: 16 gauge, polished stainless steel; reinforced corners
• Performance: Max. 1,200,000 BTU/h
• Prop Mounting Mechanism: 2 x mounting pins for small props; large props fit pan; no bolting
• Controls: Dead man switch with single control button on 20 ft (6 m) cable

• Dimensions: 26 x 15 x 40 inches (66 cm x 38 cm x 102 cm)
• Weight: 65 lbs (29.5 kg) - without propane cylinder
• Fabrication: 16 gauge, polished stainless steel; reinforced corners
• Battery: 12 VDC, gel-filled, 30 AH
• Charger: 120V in, 12V out; Multi-Amp Charger Output
• Propane Tank: 43 lb. Tank without OPD restrictive valve
• Wheel Size: 10 inch (25cm) rigid rubber

• Meets NFPA 1001 training requirements
• Portable, easy to use and flexible
• Designed to fit inside a pickup truck or small trailer
• Safe and controllable
• Interchangeable fire training props
• Fully functional car prop

• Burn Area: 6-foot by 4-foot burn pan (24-square foot burn area)
• Burners: Liquid propane burners with water bath technology
• Control Panel: Controls the pilot, burner, and auxiliary fire
• Fail Safes: An emergency-stop button and a dead-man foot pedal
• Interchangeable props: Including a car, a propane tank, pallet, BBQ, electric motor and dumpster

• Automatic cooling above 27.78°C (82°F)
• 20 individual PCM elements (Phase Change Material)
• Reduces skin temperature approx. 3-4°C (37-39°F)
• Regenerates when stored – within 4 hours at most
• Extensive preparatory and post-work activities - as with ice vests - are no longer necessary
• High freedom of movement thanks to PCM elements flexible body fit
• Broad hook-and-loop fasteners ensure a tight fit and easy donning
• Available in four different sizes (S/M, L/XL, XXL/XXXL, XXXXL/XXXXXL)

• Deployment Time: 1.5 - 4 hours
• Weight (including cooling elements): Approx. 4.63 lb.
• Cooling Surface: Approx. 2.37 ft³
• Vest Material: Polyester
• Cooling Elements Material: Salt crystal mixture
• Storage Condition: Horizontal
• Storage Temperature: < 72ºF

• Ergonomically designed harness
• Distinctive, sophisticated harness design which retains its form, making it easy for the wearer to don
• Modular Drop-down facility
• Equipped, as an option, a unique ‘drop down’ feature, whereby the cylinder can be un-clipped from the waistbelt, makes the PAS Colt ideal for use in confined space entry applications.
• Machine washable harness

EN 402: 2003

• Weight: 2 Kg
• Dimensions - Min: 790 x 500 x 70 mm
• Dimensions - Max: 950 x 500 x 70 mm
• Input Pressure Cylinder: 200 - 300 bar
• Input Pressure Airline: 6 - 9 bar
• Nominal 1st stage output pressure: 7 bar
• 1st stage output flow: > 600 l/min
• LDV output flow: > 400 l/min
• Whistle activation pressure: 4 - 5 bar
• Whistle Sound Level: > 90 dBA
• Whistle Frequency Range: 2000 - 4000 Hz
• Operating Temperature: -32 to 70 ºC

EN 137-1:2006

• Weight: 2.5 Kg
• Dimensions - Min: 550 x 500 x 70 mm
• Dimensions - Max: 640 x 500 x 70 mm
• Input Pressure Cylinder: 200 - 300 bar
• Input Pressure Airline: 6 - 9 bar
• Nominal 1st stage output pressure: 7 bar
• 1st stage output flow: > 600 l/min
• LDV output flow: > 400 l/min
• Whistle activation pressure: 100 bar
• Whistle Sound Level: > 90 dBA
• Whistle Frequency Range: 2000 - 4000 Hz
• Operating Temperature: -32 to 70 ºC

• Highest levels of comfort and durability
• Compression-molded comfort padding provides high temperature performance and exceptional wear resistance
• Anti-slip surface keeps the harness in position
• Designed to be worn on the hip, not shoulder, the PSS 7000 gives maximum flexibility while crawling and climbing
• Easy to clean and disinfect, and is highly resistant to chemical and mechanical damage
• Hi-grip, anti-slip inner surface harness
• Stays securely in place and cooling channels in the shoulder straps and waist belt reduce the likelihood of compression burns
• Innovative harness system provides unmatched comfort and durability
• Lower center of gravity to increase stability and balance, allowing you to work more effectively with less fatigue
• Adjustable harness suspension system that provides the ultimate in comfort and extended wear
• Durable webbing and advanced compression-molded comfort padding offer up to 6.5 x higher abrasion resistance than traditional padding
• Ergonomic 3 position backplate allows freedom of movement
• Self-adjusting and pivoting waist belt - designed to automatically lengthen and pivot to mirror your movements
• Reduces potential snag points and enhances the ability to be seen in the darkest situations.
• Rapid, secure cylinder change-outs save precious time
• Rated up to 600 pound pull force to use as a drag handle
• A choice of integrated safety systems to monitor air supply
• A PASS device
• Visual and audible warnings and alarms
• A streamlined design that reduces snag points
• Intuitive push-button operation for ease of use
• Configurable settings to suit individual preferences
• Data logging for improved post-incident analysis
• Slide-and-lock harness
• Supply hoses are integrated into the backplate to minimize the risk of snagging or damage

PSS 7000 w/Sentinel 7000

• Weight (w/empty 45-min): 25.6 lbs
• Input Pressure: 2216 PSI - 4500 PSI
• Nominal 1st Stage Output Pressure: 108 PSI
• 1st Stage Output Flow: >1000 L/min
• LDV Output Flow: >500 L/min
• Whistle Activation Pressure: 731 - 1485 PSI
• Whistle Sound Level: >90 dBA
• ADSU main alarm: >95 dBA
• Approvals: NFPA 1981 & 1982-2013 Edition

PSS 7000 w/Sentinel 1500

• Weight (w/empty 45-min): 23.9 lbs
• Input Pressure: 2216 PSI - 4500 PSI
• Nominal 1st Stage Output Pressure: 108 PSI
• 1st Stage Output Flow: >1000 L/min
• LDV Output Flow: >500 L/min
• Whistle Activation Pressure: 731 - 1485 PSI
• Whistle Sound Level: >90 dBA
• ADSU main alarm: >95 dBA
• Approvals: NFPA 1981 & 1982-2013 edition

• Proven technology combines comfort with performance
• Outstanding resistance to heat, impact, and chemicals
• Easy maintenance and service
• Integrated, versatile hose routing
• Wide variety of system configurations and accessories
• Choice of electronic monitoring options: Dräger Sentinel 7000 or 1500
• Integrated systems reduce risk and increase versatility
• Easy maintenance to lower cost of ownership
• Innovative slide-and-lock mechanism for fast and easy harness assembly and disassembly
• Harness detaches from the backplate without the use of tools
• First stage reducer snap-fit connection allows pneumatics to be fitted or removed quickly and easily
• Hose clips push in and out to allow swift removal of hoses from the harness pads for cleaning
• Chemical-resistant harness and waist belt design prevent excessive water absorption and reduce cleaning and drying time
• Standard batteries, no manufacturer-required overhaul, and few replacement parts contribute to a lower total cost of ownership over the life of the SCBA
• Integrated safety systems monitor air supply time
• A PASS device
• Visual and audible warnings and alarms
• Streamlined design that reduces snag points
• Intuitive push-button operation for ease of use
• Configurable settings to suit individual preferences
• Data logging for improved post-incident analysis

PSS 5000 w/Sentinel 7000

• Weight (w/empty 45-min): 24.8 lbs
• Input Pressure: 2216 PSI - 4500 PSI
• Nominal 1st Stage Output Pressure: 108 PSI
• 1st Stage Output Flow: >1000 L/min
• LDV Output Flow: >500 L/min
• Whistle Activation Pressure: 510 - 1215 PSI
• Whistle Sound Level: >90 dBA
• ADSU main alarm: >95 dBA
• Approvals: NFPA 1981 & 1982-2013 Edition

PSS 5000 w/Sentinel 1500

• Weight (w/empty 45-min): 23.1 lbs
• Input Pressure: 2216 PSI - 4500 PSI
• Nominal 1st Stage Output Pressure: 108 PSI
• 1st Stage Output Flow: >1000 L/min
• LDV Output Flow: >500 L/min
• Whistle Activation Pressure: 510 - 1215 PSI
• Whistle Sound Level: >90 dBA
• ADSU main alarm: >95 dBA
• Approvals: NFPA 1981 & 1982-2013 Edition

Dräger PSS® 5000 Datasheet

• Proven air supply technology
• Leading edge breathing protection technology
• Easy to maintain and service
• Reduced downtime and maintenance costs
• All the major components are simple and quick to remove and re-assemble
• Enhanced carrying system
• State-of-the-art pressure mapping technology
• Improved stability
• Reduction in back strain, stress and fatigue
• Optimized load distribution comfortably and securely
• Made from rugged and durable materials to minimize the impact of the most hostile of environments
• Integrated hoses to reduce the risk of snagging and entanglement
• Improved security and safety while entering and working in confined spaces

• Size: 23.2 x 11.4 x 6.3 inches (59 x 29 x 16 cm)
• Weight (Including LDV): 5.95 lbs. (2.70 kg)
• Weight w/Integrated PAS ASV (Including LDV): 7.72 lbs (3.50 kg)
• Input Pressure: 2216 PSI or 4500 PSI
• Nominal 1st Stage Output Pressure: 87 - 130 PSI
• 1st Stage Output Flow: >1000 L/min
• LDV Output Flow: >400 L/min
• Whistle Activation Pressure: 554 PSI, 1125 PSI
• Whistle Sound Level: >90 dBA
• Approvals: NIOSH