RKI Instruments Archives | Electrogas Monitors Ltd. https://www.electrogasmonitors.com/project_category/rki-instruments/ Gas Detection & Safety Supply Specialists Thu, 29 Jan 2026 21:33:04 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.electrogasmonitors.com/wp-content/uploads/2022/03/cropped-Electrogas-Favicon-2022-32x32.png RKI Instruments Archives | Electrogas Monitors Ltd. https://www.electrogasmonitors.com/project_category/rki-instruments/ 32 32 04 Series https://www.electrogasmonitors.com/project/04-series/ Mon, 25 Oct 2021 19:22:44 +0000 https://www.electrogasmonitors.com/?post_type=project&p=4957 The post 04 Series appeared first on Electrogas Monitors Ltd..

]]>

04 Series

04 Series Single Gas Detector - RKI Instruments - Electrogas
04 Series Single Gas Detector - RKI Instruments - Electrogas
04 Series Single Gas Detector - RKI Instruments - Electrogas
04 Series Single Gas Detector - RKI Instruments - Electrogas
RKI_Instruments_logo_electrogas

04 Series
Single Gas Detectors

Smallest Toxic Gas Monitor

The 04 Series toxic single gas monitor is the smallest toxic gas monitor designed to operate for many years with field-replaceable sensors and filters. The HCN, NO2, PH3, and SO2 versions can be operated continuously for at least 3,000 hours on (2) AAA-size alkaline batteries. The 04 models have 3 preset alarms that are user adjustable. Each version is also equipped with visual, audible, and vibration alarms as standard.

Each 04 Series monitor is impact, dust, and water-resistant with an IP-67 ingress protection rating. 04 Series instruments are safe for use in hazardous locations, classified as intrinsically safe ATEX/IECEx and by QPS to U.S. and Canadian standards for Class I, Division 1, Groups
A, B, C, and D atmospheres.

Available Gases

  • HCN • NO2 • PH3 • SO2 • CO/O2

Category: [project-category-list]

Tags: [project-tag-list]

  • Personal monitoring for HCN, NO2, PH3, and SO2
  • CO with H2 elimination
  • O2 / CO combo sensor
  • Operates 3,000 hours on alkaline
  • Impact, dust, and water resistance (IP-67)
  • Replaceable rubber boot
  • Datalog 5 to 300 hours with adjustable intervals
  • Audible / visual / vibration alarms
  • Automatic backlight
  • Low battery alarm
  • Intrinsically safe, ATEX and C / US approvals
  • 3-year warranty

  • Size: 2.1 x 2.6 x 0.9 inches (54 x 67 x 24 mm)
  • Weight: 2.8 ounces (80g)
  • Battery service life: 3,000 hours on alkaline
  • Protection class: IP-67
  • Display: Digital LCD, gas name & concentration, auto backlighting during alarm, operation icon, battery icon
  • Response Time: T90 in 30 seconds
  • Alarm Types:
    • Gas Alarm: 1st and 2nd (user adjustable), OVER alarm, STEL, and TWA
    • Trouble Alarm: Sensor connection, low battery circuit failure, and calibration range errors
  • Air humidity: Humidity below 90% RH (non-condensing)
  • Operating Temperature: -4°F ~ 122°F (-20°C ~ 50°C)
  • Warranty: 3-Year Warranty

Sensor Type Measuring Range (Resolution) Alarm Setpoints
SC-04 HCN 0 - 30 ppm (0.1 ppm) 5 / 10 / 30 ppm
SC-04 NO2 0 - 20 ppm (0.05 ppm) 2.0 / 4.0 / 20.0 ppm
SC-04 PH3 0 - 20 ppm (0.01 ppm) 0.3 / 0.6 / 0.6 ppm
SC-04 SO2 0 - 100 ppm (0.05 ppm) 2 / 5 / 100 ppm
CO-04 0 - 2000 ppm (1 ppm) 25 / 50 / 1200 ppm
CX-04 (CO & O2) CO: 0 - 2000 ppm (1 ppm)
O2: 0 - 40% (0.1%)		 CO: 2 / 5 / 100 ppm
O2: 19.5 / 18.0 / 25 %

04 Series Single Gas Datasheet

CO-04 (CO) User Manual

CX-04 (CO/O2) User Manual

SC-04 User Manual

Get More Info

The post 04 Series appeared first on Electrogas Monitors Ltd..

]]> GX-3R https://www.electrogasmonitors.com/project/gx-3r/ Thu, 14 May 2020 21:08:46 +0000 https://www.electrogasmonitors.com/?post_type=project&p=3884 The post GX-3R appeared first on Electrogas Monitors Ltd..

]]>

GX-3R

GX-3R - Multi-Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
GX-3R - Multi-Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
GX-3R - Multi-Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
GX-3R - Multi-Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
RKI_Instruments_logo_electrogas

GX-3R

The GX-3R is the world’s smallest 4-gas monitor, weighing only 3.52 ounces and can comfortably be clipped within a worker’s breathing zone. It simultaneously monitors and displays LEL combustibles, O2, CO (H2 compensated CO also available), and H2S.

It represents the latest evolution of gas detection technology utilizing a new generation of microsensor technology.

Sensor Improvements

  • LEL sensor has a unique design with two active filaments in one sensor to increase its resistance to silicone poisoning – a common problem with other previous sensors.
  • NEW O2 sensor is electrochemical with a 3 to 5-year life span.
  • H2S and CO are now available in a combo microsensor.

The instrument also incorporates compliance testing by activating its 3 LED lights every 30 seconds (adjustable interval) if the instrument has not been bump tested if calibration is due, or if there was a gas alarm event. These LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved.

Available Accessory: RP-3R Sample Draw Pump

Category: [project-category-list]

Tags: [project-tag-list]

  • Smallest & lightest 4 gas monitor
  • Simultaneous detection of 4 gases (LEL, O2, H2S & CO; H2)
  • Compensated CO sensor available)
  • Simple 2-button operation
  • Non-Compliance Indicator
  • Alarms: audible, visual, & vibration
  • 3 user-adjustable alarm levels
  • Impact-resistant body with removable rubber boot
  • Large LCD Auto-backlit display
  • 25 hours of operation (Lithium-ion battery)
  • Field replaceable sensors & filters
  • Water and dust resistant design, IP66/68
  • 3 Year warranty

  • Dimensions: 2.2 W x 2.55 H x 1.02 D inches (H 200 x W 68 x D 52 mm)
  • Weight: 3.52 ounces
  • Alarm Types:
    • Gas alarm: 3 Increasing alarms, STEL, TWA, overscale alarm. O2 decreasing/increasing
    • Trouble: Sensor disconnection, low battery, a circuit error, a calibration range error
  • Sample Method: Diffusion sampling standard (hand aspirator or clip-on motorized pump optional)
  • Response Time: Within 30 Seconds (T90)
  • Display: Digital LCD displays with 7 segments plus 14 segments plus icon
  • Audible Alarm: Gas Alarm 100 dB @ 30 cm; Trouble Alarm 95 dB @ 30cm
  • Power Source: Lithium-ion battery, Approx. 25 hours after a 3-hour full charge
  • Operating Temperature: -20°C to +50°C (-4°F to +122°F )
  • Relative Humidity: 10 t0 90% RH non-condensing
  • Warranty: Three-year material (including sensors) and workmanship

Sensor Type Measuring Range Resolution
Dual H2S/CO H2S: 0 - 200.0 ppm
CO: 0 - 2,000 ppm		 H2S: 0.1 ppm
CO: 1 ppm
CO (H2 Compensated) 0 - 2000 ppm 1 ppm
LEL 0 to 100% LEL 1% LEL
O2 0 - 40.0 % Vol. 0.1 %Vol.

GX-3R Datasheet

GX-3R Operating Manual

GX-3R Quick Reference Guide

Request a Demo

Schedule a demo with the experts at Electrogas to experience firsthand the innovative safety solutions we offer. Our team is dedicated to providing personalized demonstrations tailored to your specific needs and requirements.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The post GX-3R appeared first on Electrogas Monitors Ltd..

]]> GX-3R Pro https://www.electrogasmonitors.com/project/gx-3r-pro/ Thu, 14 May 2020 21:43:17 +0000 https://www.electrogasmonitors.com/?post_type=project&p=3900 The post GX-3R Pro appeared first on Electrogas Monitors Ltd..

]]>

GX-3R Pro

GX-3R Pro - Specialty Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
GX-3R Pro - Specialty Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
GX-3R Pro - Specialty Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
GX-3R Pro - Specialty Gas Detectors - RKI Instruments - Electrogas Monitors Ltd.
RKI_Instruments_logo_electrogas

GX-3R Pro

The GX-3R Pro is the world’s smallest 5-gas monitor and fits in the palm of your hand. It simultaneously monitors and displays 5 different gases. In addition to monitoring standard confined space gases, LEL, O2, CO, & H2S, the GX-3R Pro has a 5th channel where you can add infrared or toxic sensors. Two of the four sensor slots have interchangeable sensors providing flexible configurations, which can easily be changed in the field.

The GX-3R Pro utilizes Bluetooth® communication to display direct gas readings from the instrument to a phone app (Download Now iOS or Android). Automatic notifications can be programmed to send text or email messages if there is an alarm event from the GX-3R Pro.

Finally, like the Gx-3R, the Pro version also comes with a non-compliance indicator. The instrument flashes it’s 3 LED lights every 30 seconds (adjustable interval) if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved.

Available Accessory: RP-3R Sample Draw Pump

Category: [project-category-list]

Tags: [project-tag-list]

  • Smallest & lightest 5 gas monitor
  • Simultaneous detection of 5 gases (LEL, O2, H2S, CO, and other optional sensors; H2 Compensated CO sensor available)
  • Simple 2-button operation
  • Bluetooth® communication with iOS & Android App
  • Non-Compliance Indicator
  • 3 user-adjustable alarm levels
  • Panic Alarm (Tap instrument twice)
  • Man Down Alarm
  • Impact-resistant body
  • Large full dot, auto-backlit display with auto-rotation
  • Stealth mode for law enforcement
  • Field replaceable sensors & filters
  • Water and dust resistant design, IP66/68
  • 3 Year Warranty

  • Dimensions: 2.9 W x 2.6 H x 1.06 D inches
  • Weight: 4.58 ounces
  • Alarm Types:
    • Gas alarm: Two increasing alarms, STEL, TWA, and Overscale alarm. O2 decreasing/increasing
    • Trouble: Sensor disconnection, low battery, a circuit error, calibration range error, calibration or bump due alarm
  • Sample Method: Diffusion sampling standard (hand aspirator or clip-on motorized pump optional)
  • Response Time: Within 30 Seconds (T90)
  • Display: Full dot LCD with Auto backlight and Autorotation
  • Audible Alarm: Gas Alarm 100 dB @ 30 cm; Trouble Alarm 95 dB @ 30cm
  • Power Source: Li-ion (16 - 25 hours depending on sensors installed); Alkaline (7 - 16 hours depending on sensors installed)
  • Operating Temperature: -20°C to +50°C (-4°F to +122°F )
  • Relative Humidity: 10 t0 90% RH non-condensing
  • Bluetooth® Communication: BLE with iOS and Andriod phone app: RK Link
  • Datalogging: Logs user ID, Station ID, Calibration/Bump History, Alarm Events, and Alarm Trends
  • Warranty: Three-year material (including sensors) and workmanship

Sensor Type Measuring Range Resolution
Dual H2S/CO H2S: 0 - 200.0 ppm
CO: 0 - 2,000 ppm		 H2S: 0.1 ppm
CO: 1 ppm
CO (H2 Compensated) 0 - 2000 ppm 1 ppm
LEL 0 to 100% LEL 1% LEL
O2 0 - 40.0 % Vol. 0.1 %Vol.
SO2 0 - 100.0 ppm 0.05 ppm
CO2 (%) 0 - 10.0 % Vol. 0.01 %Vol.
CO2 (ppm) 0 - 10,000 ppm 20 ppm

GX-3R Pro Datasheet

GX-3R Pro Operating Manual

GX-3R Pro Quick Reference Guide

Request a Demo

Schedule a demo with the experts at Electrogas to experience firsthand the innovative safety solutions we offer. Our team is dedicated to providing personalized demonstrations tailored to your specific needs and requirements.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The post GX-3R Pro appeared first on Electrogas Monitors Ltd..

]]> GX-6100 https://www.electrogasmonitors.com/project/gx-6100/ Wed, 26 Sep 2018 22:36:40 +0000 https://www.electrogasmonitors.com/?post_type=project&p=1876 The post GX-6100 appeared first on Electrogas Monitors Ltd..

]]>

GX-6100

GX-6100

The GX-6100 is a compact, powerful handheld gas monitor capable of simultaneously detecting up to six gases. In addition to standard confined space gases including combustibles, oxygen, carbon monoxide, and hydrogen sulfide, it features two smart channels that support PID, PPM, IR, or super toxic sensors for flexible field configurations.

Designed for demanding environments, the GX-6100 includes an internal sample pump, man-down and panic alarms, a bright LED flashlight, and a large auto-rotating display for clear visibility in the field. PID-equipped models include a library of over 600 VOCs with customizable favorites and recent-gas lists, along with optional benzene-specific monitoring using a pre-filter tube.

Built for durability, the GX-6100 features an impact-resistant rubber boot, an IP-67-rated enclosure, and high-visibility multi-directional LED alarms to ensure reliable performance and clear alerts in harsh working conditions.

Category: [project-category-list]

Tags: [project-tag-list]

• Portable sample draw gas monitor detecting up to 6 gases
• Compact design with two smart sensor slots
• Supports PID, PPM, IR, and super toxic sensors
• PID options with library of over 600 VOCs and benzene-specific configuration
• Internal sample pump with leak check and sensor protection modes
• Man-down and panic alarms with audible, visual, and vibration alerts
• Auto-rotating LCD with peak-bar display and LED light
• Rugged IP-67-rated design for harsh environments
• Interchangeable lithium-ion or alkaline battery packs with extended runtime
• Field-replaceable sensors, batteries, filters, and pump
• Intrinsically safe design certified to ATEX, IECEx, and cCSAus standards

• Detects up to 6 gases simultaneously using an internal sample draw pump
• Supports LEL, oxygen, carbon monoxide, hydrogen sulfide, PID, PPM, IR, and super toxic sensors
• Two interchangeable smart sensor slots with multiple PID lamp options
• PID library with over 600 VOCs and customizable gas lists
• Large auto-rotating LCD with audible, visual, vibration, man-down, and panic alarms
• Multiple operating modes including leak check and benzene-specific monitoring
• Interchangeable lithium-ion or alkaline battery packs with extended runtime
• Rugged IP-67-rated enclosure for harsh industrial environments
• Field-replaceable sensors, batteries, filters, and pump
• Bluetooth connectivity for wireless alerts and data sharing
• Intrinsically safe certifications including ATEX, IECEx, and cCSAus

Sensor Type Measuring Range Resolution
PID 10.6 eV Lamp 0 to 50,000 ppb 1 ppb (below 5,000 ppb); 10 ppb (above 5,000 ppb)
PID 10.0 eV Lamp (Benzene Specific) 0.1 to 50 ppm 0.01 ppm (0 to 10 ppm); 0.1 ppm (10 to 50 ppm)
PID 10.0 eV Lamp (VOC Library) 0 to 100 ppm 0.01 ppm (0 to 10 ppm); 0.1 ppm (10 to 100 ppm)
Carbon Monoxide (CO) 0 to 500 ppm 1 ppm
Hydrogen Sulfide (H₂S) 0 to 100 ppm 0.5 ppm
Ammonia (NH₃) 0 to 400 ppm 0.5 ppm
Chlorine (Cl₂) 0 to 10.00 ppm 0.05 ppm
Hydrogen Cyanide (HCN) 0 to 15 ppm 0.1 ppm
Nitrogen Dioxide (NO₂) 0 to 20.00 ppm 0.05 ppm
Sulfur Dioxide (SO₂) 0 to 99.90 ppm 0.05 ppm
Carbon Dioxide (CO₂) 0 to 10,000 ppm 20 ppm
Methane (IR) 0 to 100% LEL or 0 to 100% volume 1% LEL or 0.5% volume
Hydrocarbons (IR) 0 to 100% LEL or 0 to 30% volume 1% LEL or 0.5% volume
Methane (Catalytic) 0 to 100% LEL 1% LEL

GX-6100 Software

GX-6100 Data Logger Program

GX-6100 User Config Program

GX-6100 Software

GX-6100 Product Datatsheet

GX-6100 User Config Operator’s Manual

GX-6100 Data Logger Operator’s Manual

Request a Demo

Schedule a demo with the experts at Electrogas to experience firsthand the innovative safety solutions we offer. Our team is dedicated to providing personalized demonstrations tailored to your specific needs and requirements.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The post GX-6100 appeared first on Electrogas Monitors Ltd..

]]> SDM-03 https://www.electrogasmonitors.com/project/sdm-03/ Tue, 09 Apr 2019 19:55:08 +0000 https://www.electrogasmonitors.com/?post_type=project&p=2495 The post SDM-03 appeared first on Electrogas Monitors Ltd..

]]>

SDM-03

SDM-03 - Docking Station - RKI Instruments - Electrogas Monitors
SDM-03 - Docking Station - RKI Instruments - Electrogas Monitors
SDM-03 - Docking Station - RKI Instruments - Electrogas Monitors

SDM-03 Docking Station

Automated Docking and Calibration Station

The SDM-03 is a versatile maintenance tool that automates the testing service of a 03 Series portable gas monitor. This docking station can be used as a stand-alone device or be paired with up to 10 individual modules for charging, simultaneous calibration and bump testing of your single gas detectors. All records are stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included). SDM-03 stations can be manifolded together to reduce the number of demand flow regulator gas cylinders required.

Compatible with:

  • HS-03
  • CO-03
  • GP-03
  • OX-03

Category: [project-category-list]

Tags: [project-tag-list]

Stand Alone Station

  • Stand-alone station (no PC required)
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to a USB jump drive
  • Includes PC software for viewing/ archiving bump test and calibration records

Multi-Module System

  • Multiple modules connected to a PC (10 max)
  • Calibration
  • Bump Test
  • Automatic calibration/bump test option
  • Configure 03 Series parameters
  • Archive Bump Test and Calibration records
  • Archive data to a network location
  • Software controlled data retrieval
  • Windows 7 compatible

  • Input Power: 12 VDC (NOTE: AC Adapter with 100 – 240 VAC, 50/60 Hz,0.6A input and 12 VDC, 1.2A output provided as standard.)
  • Environmental Conditions: For Indoor Use Only
  • Operation Temperature: -10° C to 40° C
  • Humidity: below 80% Relative Humidity, Non-Condensing
  • Applicable Instruments: 03 Series
  • Maximum Number of Records Saved: 200 (stand-alone). Unlimited with software
  • Ports: 3 Ports (1 Calibration gas; 1 fresh air; 1 exhaust)
  • Standard Accessories
    • AC Adapter
    • USB Flash Drive
    • Single Module Data Viewer Software
    • SDM-03 Docking Station PC Controller Program
    • Inlet Air Filter
    • Instruction Manual
    • 10 Foot Long Exhaust Tube
    • One 3 Foot Long Tube for GAS Fitting
    • 2 T-Fittings (for PC Controlled Configuration only)
    • 10 Foot Long 3/16 Inch Tube for GAS manifolding (used for PC Controlled Configuration only)
    • Check Valve (used for PC Controlled Configuration only)
    • USB Cable, Type A to Type B

SDM-03 Docking Station Datasheet

SDM-03 Docking Station Stand-Alone Operating Manual

SDM-03 Docking Station PC Controller Operating Manual

SDM-03 Docking Station Quick Reference Guide

Request a Demo

Schedule a demo with the experts at Electrogas to experience firsthand the innovative safety solutions we offer. Our team is dedicated to providing personalized demonstrations tailored to your specific needs and requirements.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The post SDM-03 appeared first on Electrogas Monitors Ltd..

]]> SDM-3R https://www.electrogasmonitors.com/project/sdm-3r/ Thu, 07 Apr 2022 00:10:39 +0000 https://www.electrogasmonitors.com/?post_type=project&p=5301 The post SDM-3R appeared first on Electrogas Monitors Ltd..

]]>

SDM-3R

SDM-3R - Docking Station - RKI Instruments - Electrogas Monitors
SDM-3R - Docking Station - RKI Instruments - Electrogas Monitors
SDM-3R - Docking Station - RKI Instruments - Electrogas Monitors

SDM-3R Calibration and Docking Station

Automated Docking and Calibration Station for the GX-3R

The SDM-3R is a versatile calibration and docking station for the GX-3R 4-gas monitors. This maintenance tool automates the service of your GX-3R or GX-3R Pro portable gas monitors.

Stand-Alone Use

This docking station can be used as a stand-alone device for charging, calibration and bump testing of your GX-3R fleet while storing all records automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

You can also automate how you manage and service your GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments at a time. Yes, that is right! SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Category: [project-category-list]

Tags: [project-tag-list]

Stand-Alone Use

  • Compatible with both GX-3R and GX-3R Pro
  • Automatically charge, bump test, and/or calibrate
  • Auto on/off of gas detector
  • 3 separate gas inputs
  • Multiple modules (10 max) can use one set of calibration equipment
  • Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
  • Includes PC software for viewing/archiving bump tests, calibration records, and event data

PC-Controlled Use

  • Multiple modules connected to a PC (10 max)
  • Automatic calibration/bump test option
  • Configure GX-3R (Pro) parameters
  • Archive Bump Test, Calibration, and Alarm Check
  • Archive data to a network location
  • Software controlled data retrieval
  • Windows 7, 8, and 10 compatible

  • Input Power: AC Adapter with 100 – 240 VAC, 47-63 Hz, 0.4A input and 5.99 VDC, 2A output provided as standard.
  • Environmental Conditions: For Indoor Use Only
  • Operation Temperature: 0° C to 40° C
  • Humidity: below 95% Relative Humidity, Non-Condensing
  • Applicable Instruments: GX-3R, GX-3R Pro
  • Maximum Number of Records Saved: 200 calibrations, or 214 bump test, or 469 alarm check records (Stand-Alone); Unlimited with PC-Controlled
  • Ports: 3 ( 1 Calibration gas, 1 fresh air and 1 exhaust)
  • Standard Accessories
    • AC Adapter
    • USB Flash Drive
    • Inlet Air Filter
    • 10 Foot Long Exhaust Tube
    • One 3 Foot Long Tube for GAS Fitting
    • USB Cable, Type A to Type B

SDM-3R Docking Station Datasheet

SDM-3R Docking Station Stand-Alone Operating Manual

SDM-3R Docking Station PC-Controlled Operating Manual

Request a Demo

Schedule a demo with the experts at Electrogas to experience firsthand the innovative safety solutions we offer. Our team is dedicated to providing personalized demonstrations tailored to your specific needs and requirements.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The post SDM-3R appeared first on Electrogas Monitors Ltd..

]]> SDM-2009 https://www.electrogasmonitors.com/project/sdm-2009/ Tue, 09 Apr 2019 20:31:29 +0000 https://www.electrogasmonitors.com/?post_type=project&p=2504 The post SDM-2009 appeared first on Electrogas Monitors Ltd..

]]>

SDM-2009

SDM-2009 - Docking Station - RKI Instruments - Electrogas Monitors
SDM-2009 - Docking Station - RKI Instruments - Electrogas Monitors
SDM-2009 - Docking Station - RKI Instruments - Electrogas Monitors
SDM-2009 - Docking Station - RKI Instruments - Electrogas Monitors

SDM-2009 Docking Station

Automated Docking and Calibration Station for the GX-2009

RKI’s new SDM-2009 calibration station for the GX-2009 is available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration. It can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2009 stations to charge, calibrate, and bump test 10 instruments simultaneously.

Category: [project-category-list]

Tags: [project-tag-list]

Stand Alone Station

  • Stand-alone station (no PC required)
  • Charging
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to a USB jump drive
  • Includes PC software for viewing/ archiving bump test and calibration records

Multi-Module System

  • Multiple modules connected to a PC (10 max)
  • Charging
  • Calibration
  • Bump Test
  • Automatic calibration/bump test option
  • Configure GX-2009 parameters
  • Archive Bump Test and Calibration records
  • Archive data to a network location
  • Software controlled data retrieval
  • Windows 7 compatible

  • Input Power: 12 VDC (NOTE: AC Adapter with 100 – 240 VAC, 50/60 Hz,0.6A input and 12 VDC, 1.2A output provided as standard.)
  • Environmental Conditions: For Indoor Use Only
  • Operation Temperature: -10° C to 40° C
  • Humidity: below 80% Relative Humidity, Non-Condensing
  • Applicable Instruments: GX-2009
  • Maximum Number of Records Saved: 200 (stand-alone). Unlimited with software
  • Ports: 3 Ports (1 Calibration gas; 1 fresh air; 1 exhaust)
  • Standard Accessories
    • AC Adapter
    • USB Flash Drive
    • Single Module Data Viewer Software
    • SDM-03 Docking Station PC Controller Program
    • Inlet Air Filter
    • Instruction Manual
    • 10 Foot Long Exhaust Tube
    • One 3 Foot Long Tube for GAS Fitting
    • 2 T-Fittings (for PC Controlled Configuration only)
    • 10 Foot Long 3/16 Inch Tube for GAS manifolding (used for PC Controlled Configuration only)
    • Check Valve (used for PC Controlled Configuration only)
    • USB Cable, Type A to Type B

SDM-2009 Docking Station Datasheet

SDM-2009 Docking Station Stand-Alone Operating Manual

SDM-2009 Docking Station PC Controller Operating Manual

SDM-2009 Docking Station Quick Reference Guide

Request a Demo

Schedule a demo with the experts at Electrogas to experience firsthand the innovative safety solutions we offer. Our team is dedicated to providing personalized demonstrations tailored to your specific needs and requirements.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The post SDM-2009 appeared first on Electrogas Monitors Ltd..

]]>