RAE Systems by Honeywell Archives | Electrogas Monitors Ltd. https://www.electrogasmonitors.com/project_category/rae-systems-by-honeywell/ Gas Detection & Safety Supply Specialists Wed, 22 Oct 2025 20:54:16 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.electrogasmonitors.com/wp-content/uploads/2022/03/cropped-Electrogas-Favicon-2022-32x32.png RAE Systems by Honeywell Archives | Electrogas Monitors Ltd. https://www.electrogasmonitors.com/project_category/rae-systems-by-honeywell/ 32 32 RAELink 3 https://www.electrogasmonitors.com/project/raelink-3/ Fri, 23 Aug 2019 21:21:08 +0000 https://www.electrogasmonitors.com/?post_type=project&p=3008 The post RAELink 3 appeared first on Electrogas Monitors Ltd..

]]>

RAELink 3

RAELink 3 - Connected Worker Solutions - RAE Systems by Honeywell - Electrogas
RAELink 3 - Connected Worker Solutions - RAE Systems by Honeywell - Electrogas

RAELink 3

The RAELink3 from RAE System by Honeywell is a wireless transmitter which enables a central ProRAE Guardian base station to view sensor and alarm data from RAE Systems portable monitors (and some select third-party devices). The RAELink 3 offers improved awareness for all situations and faster response time to any incidents. It also provides GPS data so safety personnel or site leaders are aware of the location of personnel and monitors. The unit can be programmed to function as a host or remote router, as well as a signal repeater, giving you versatility and flexibility in your infrastructure.

Category: [project-category-list]

Tags: [project-tag-list]

  • Wireless router with GPS
  • Can transmit data up to 2 miles away
  • User-friendly display and interface
  • Can be configured as a host, repeater, or remote gateway for portable monitors
  • Rugged weather- and shock-proof housing
  • Runs 18 hours on a single battery charge
  • Easily configured in the field

  • Size: 4.73 L x 3.4 W x 1.85 H inches (12cm x 8.65cm x 4.7cm) without antenna
  • Weight: 17.3 oz (490g)
  • Battery: Rechargeable, 7.4V/1650mAh, Lithium-ion external battery pack with charging station; Alkaline adapter (5 x AA)
  • Charging Time: 6 hours
  • Operating Hours: Up to 18 Hours continuous operation on a charge
  • Operating Temperature: -4° to 131° F (-20° to +55° C)
  • Humidity: 0% to 95% relative humidity (non-condensing)
  • IP Rating: IP-65
  • GPS Accuracy: Within 5 meters
  • Range: Up to 3 km (2 Miles)
  • Interface: RS-232 or Bluetooth 2.0
  • Display: LCD, 128 x 64
  • Wireless Frequency: ISM License free band (902 - 928 MHz)

RAELink 3 Datasheet

RAELink 3 2.4 GHz Datasheet

RAELink 3 Z1 Datasheet

RAELink 3 Operating Manual

RAELink 3 Quick Start Guide

Get More Info

The post RAELink 3 appeared first on Electrogas Monitors Ltd..

]]> ToxiRAE Pro https://www.electrogasmonitors.com/project/toxirae-pro/ Thu, 08 Mar 2018 17:57:53 +0000 https://www.electrogasmonitors.com/?post_type=project&p=358 The post ToxiRAE Pro appeared first on Electrogas Monitors Ltd..

]]>

ToxiRAE Pro

ToxiRAE Pro - RAE Systems by Honeywell
ToxiRAE Pro - RAE Systems by Honeywell
ToxiRAE Pro - RAE Systems by Honeywell
RAE_Systems_Product_Logo

ToxiRAE Pro

The ToxiRAE Pro is the world’s first wireless personal monitor for toxic gases and oxygen. The ToxiRAE provides safety professionals wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response. The ToxiRAE Pro’s intelligent interchangeable sensors store calibration data, which allows users to monitor for one gas one day and another gas the next, by simply swapping the sensors in the ToxiRAE Pro.

Category: [project-category-list]

Tags: [project-tag-list]

Available Gases:

  • NH3
  • CO
  • CO: Ext. Range
  • CO: H2 Comp
  • Cl2
  • ClO2
  • ETO-A
  • ETO-B
  • ETO-C: Ext. Range
  • HCHO (Formaldehyde)
  • H2
  • HCN
  • H2S
  • H2S: Ext. Range
  • CH3-SH (Methyl Mercaptan)
  • NO
  • NO2
  • O2
  • PH3
  • SO2

  • Personal wireless monitor for toxic gases and oxygen
  • Swap out sensors for different gases
  • Sensors store calibration data even when swapped out
  • 5-way local and remote wireless alarm system
  • Largest display in class
  • Water-, dust-, and shock-resistant
  • Compatible with AutoRAE 2 (Fully automatic bump testing and calibration)
  • Built-in man-down alarm
  • Most sensors can be shared with MultiRAE instrument family

  • Size: 4.6 H x 2.4 W x 1.2 D inches (118 x 60 x 30 mm)
  • Weight: 7.76 oz. (220 g)
  • Battery: Rechargeable Li-ion battery
  • Operating time: > 30 hours (normal operation, non-wireless)
  • Recharge time: < 4 hours through charging cradle
  • Operating Temperature: -4° to 131°F (-20° to 55°C)
  • Humidity: 0% to 95% relative humidity (non-condensing)
  • Dust and Water Resistance: IP-65 rating
  • Display: Graphical LCD display with white LED backlighting
  • Display Readout:
    • Real-time reading of gas concentrations
    • Battery status
    • Data logging on/off
    • Wireless on/off
    • Reception quality
    • STEL, TWA, and peak values
  • Keypad: 2 buttons for operation and programming
  • Alarms:
    • Wireless remote alarm notification
    • Audible (95 dB @ 30 cm)
    • Vibration
    • Visible alarm (flashing bright red LEDs)
    • On-screen indication of alarm conditions.
    • Man Down Alarm with pre-alarm and real-time remote wireless notification
  • Datalogging: Continuous datalogging with a three-month capacity
  • Wireless Network:
    • ProRAE Guardian Real-Time Wireless Safety System
    • Loop Network with the EchoView Host
  • Wireless Range (Typical)
      • ToxiRAE Pro to Mesh Router, EchoView Host, or Mesh Reader 2: ~ 660 feet (200 meters)
      • ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems: ~ 330 feet (100 meters)

    Sensor Type Measuring Range Resolution
    NH3 0 - 100 ppm 1 ppm
    CO 0 - 500 ppm 1 ppm
    CO (Ext. Range) 0 - 2000 ppm 10 ppm
    CO (H2 - Comp) 0 - 2000 ppm 10 ppm
    Cl2 0 - 50 ppm 0.1 ppm
    ClO2 0 - 1 ppm 0.03 ppm
    ETO-A 0 - 100 ppm 1 ppm
    ETO-B 0 - 10 ppm 0.1 ppm
    ETO-C (Ext. Range) 0 - 500 ppm 10 ppm
    HCHO (Formaldehyde) 0 - 500 ppm 1 ppm
    HCN 0 - 50 ppm 0.5 ppm
    H2S 0 - 100 ppm 0.1 ppm
    H2S (Ext. Range)
    		 0 - 1000 ppm 1 ppm
    CH3-SH (Methyl Mercaptan) 0 - 10 ppm 0.1 ppm
    NO 0 - 250 ppm 0.5 ppm
    NO2 0 - 20 ppm 0.1 ppm
    O2 0 - 30% 0.1%
    PH3 0 - 20 ppm 0.1 ppm
    SO2 0 - 20 ppm 0.1 ppm
    H2 0 - 1000 ppm 10 ppm

    ToxiRAE Pro Datasheet

    ToxiRAE Pro Quick Reference Guide

    ToxiRAE Pro Operating Manual

    Get More Info

    The post ToxiRAE Pro appeared first on Electrogas Monitors Ltd..

    ]]>         ToxiRAE Pro LEL https://www.electrogasmonitors.com/project/toxirae-pro-lel/ Thu, 08 Mar 2018 19:35:25 +0000 https://www.electrogasmonitors.com/?post_type=project&p=380 The post ToxiRAE Pro LEL appeared first on Electrogas Monitors Ltd..

    ]]>

    ToxiRAE Pro LEL

    ToxiRAE Pro - RAE Systems by Honeywell
    ToxiRAE Pro - RAE Systems by Honeywell
    ToxiRAE Pro - RAE Systems by Honeywell

    ToxiRAE Pro LEL

    For environments where combustible gases can pose a threat to your workers and your facility, this personal wireless monitor provides the visibility you need for fast incident response. The ToxiRAE Pro LEL features the most extensive onboard gas library in its class, plus 55 built-in correction factors for improved accuracy. The wireless connectivity delivers real-time data about proximity to the lower explosive limit (LEL) directly to a central command station. And with a built-in man-down alarm, you can be confident your workers are safe. The compact design of the ToxiRAE Pro LEL ensures it won’t interfere with work activities, while the replaceable sensor, filter, and battery make it easy to maintain.

    Category: [project-category-list]

    Tags: [project-tag-list]

    • Personal wireless monitor for combustible gases
    • Delivers results as a percentage of the lower explosive limit (LEL)
    • Most extensive on-board gas library in its class
    • 55 built-in correction factors
    • 5-way local and remote wireless alarm
    • Water-, dust-, and shock-resistant
    • Built-in man-down alarm
    • Compatible with AutoRAE 2
    • Fully automatic bump testing and calibration

    • Size: 4.6 H x 2.4 W x 1.2 D inches (118 x 60 x 30 mm)
    • Weight: 7.76 oz. (220 g)
    • Battery: Rechargeable Li-ion battery
    • Operating time: > 30 hours (normal operation, non-wireless)
    • Recharge time: < 4 hours through charging cradle
    • Operating Temperature: -4° to 131°F (-20° to 55°C)
    • Humidity: 0% to 95% relative humidity (non-condensing)
    • Dust and Water Resistance: IP-65 rating
    • Display: Graphical LCD display with white LED backlighting
    • Display Readout:
      • Real-time reading of gas concentrations
      • Battery status
      • Data logging on/off
      • Wireless on/off
      • Reception quality
      • STEL, TWA, and peak values
    • Keypad: 2 buttons for operation and programming
    • Alarms:
      • Wireless remote alarm notification
      • Audible (95 dB @ 30 cm)
      • Vibration
      • Visible alarm (flashing bright red LEDs)
      • On-screen indication of alarm conditions.
      • Man Down Alarm with pre-alarm and real-time remote wireless notification
    • Datalogging: Continuous datalogging with a three-month capacity
    • Wireless Network:
      • ProRAE Guardian Real-Time Wireless Safety System
      • Loop Network with the EchoView Host
    • Wireless Range (Typical)
        • ToxiRAE Pro to Mesh Router, EchoView Host, or Mesh Reader 2: ~ 660 feet (200 meters)
        • ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems: ~ 330 feet (100 meters)

      Sensor Type Measuring Range Resolution
      LEL 0 - 100% LEL 1 % LEL

      ToxiRAE Pro LEL Datasheet

      ToxiRAE Pro LEL Quick Reference Guide

      ToxiRAE Pro LEL Operating Manual

      Get More Info

      The post ToxiRAE Pro LEL appeared first on Electrogas Monitors Ltd..

      ]]>             ToxiRAE Pro CO2 https://www.electrogasmonitors.com/project/toxirae-pro-co2/ Thu, 08 Mar 2018 19:14:22 +0000 https://www.electrogasmonitors.com/?post_type=project&p=369 The post ToxiRAE Pro CO2 appeared first on Electrogas Monitors Ltd..

      ]]>

      ToxiRAE Pro CO2

      ToxiRAE Pro CO2

      Increase worker safety and improve incident response during compliance-related procedures and periodic testing with this rugged, easy-to-maintain device. The ToxiRAE Pro CO2 is the only wireless CO2 single gas monitor available on the market. The ToxiRAE Pro CO2 is a personal detector that keeps people aware of carbon dioxide levels and facilitates remote monitoring of those readings from a central command station. The ToxiRAE Pro CO2 includes a replaceable filter and sensor, rechargeable lithium-ion battery, and automated bump testing and calibration to make it easy to use and maintain.

      Category: [project-category-list]

      Tags: [project-tag-list]

      • First of its kind wireless personal carbon dioxide monitor
      • Wireless remote access for centralized monitoring
      • Built-in man down alarm
      • Rechargeable lithium-ion battery
      • Automatic bump testing and calibration with AutoRAE 2
      • 5-way local and remote alarm capabilities
      • Large display

      • Size: 4.6 H x 2.4 W x 1.2 D inches (118 x 60 x 30 mm)
      • Weight: 7.76 oz. (220 g)
      • Battery: Rechargeable Li-ion battery
        • Operating time: > 11 hours (normal operation, non-wireless)
        • Recharge time: < 4 hours through charging cradle
      • Operating Temperature: -4° to 131°F (-20° to 55°C)
      • Humidity: 0% to 95% relative humidity (non-condensing)
      • Dust and Water Resistance: IP-65 rating
      • Display: Graphical LCD display with white LED backlighting
      • Display Readout:
        • Real-time reading of gas concentrations
        • Battery status
        • Data logging on/off
        • Wireless on/off
        • Reception quality
        • STEL, TWA, and peak values
      • Keypad: 2 buttons for operation and programming
      • Alarms:
        • Wireless remote alarm notification
        • Audible (95 dB @ 30 cm)
        • Vibration
        • Visible alarm (flashing bright red LEDs)
        • On-screen indication of alarm conditions.
        • Man Down Alarm with pre-alarm and real-time remote wireless notification
      • Datalogging: Continuous datalogging with a three-month capacity
      • Wireless Network:
        • ProRAE Guardian Real-Time Wireless Safety System
        • Loop Network with the EchoView Host
      • Wireless Range (Typical)
          • ToxiRAE Pro to Mesh Router, EchoView Host, or Mesh Reader 2: ~ 660 feet (200 meters)
          • ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems: ~ 330 feet (100 meters)

        ToxiRAE Pro CO2 Datasheet

        ToxiRAE Pro CO2 Operating Manual

        ToxiRAE Pro CO2 Quick Reference Guide

        Get More Info

        The post ToxiRAE Pro CO2 appeared first on Electrogas Monitors Ltd..

        ]]>                 ToxiRAE Pro PID https://www.electrogasmonitors.com/project/toxirae-pro-pid/ Thu, 08 Mar 2018 20:11:14 +0000 https://www.electrogasmonitors.com/?post_type=project&p=391 The post ToxiRAE Pro PID appeared first on Electrogas Monitors Ltd..

        ]]>

        ToxiRAE Pro PID

        ToxiRAE Pro PID - RAE Systems by Honeywell
        ToxiRAE Pro PID - RAE Systems by Honeywell
        ToxiRAE Pro PID - RAE Systems by Honeywell

        ToxiRAE Pro PID

        Protect workers from the threat of volatile organic compounds (VOCs) in the workplace and observe conditions remotely from a central command station with this compact, wireless monitor. The ToxiRAE Pro PID’s next-generation sensor can detect over 300 VOCs and uses a built-in onboard library of 190 correction factors to automatically read gases in equivalent units. Reliable, rugged, and intrinsically safe, the ToxiRAE Pro PID can be easily attached to workers’ uniforms and also provides a man-down alarm. It all adds up to better visibility and faster incident response in a variety of conditions.

        Category: [project-category-list]

        Tags: [project-tag-list]

        • Compact, personal wireless monitor
        • PID sensor accurately monitors over 300 VOCs
        • Built-in library of 190 correction factors for automatic reading in equivalent units
        • 5-way local and remote wireless alarm
        • Water-, dust-, and shock-resistant
        • Built-in man down alarm
        • Fully automatic bump testing and calibration with AutoRAE2

        • Size: 130 mm x 48 mm x 44 mm (5.12 x 1.89 x 1.73 inches)
        • Weight: 220 to 250 g
        • Display Type: Matrix display with high resolution
        • Alarms:
          • Visual: 3 LED "red" (gas alarms); 3 LED "yellow" (device alarm)
          • Audible: Multi-ton > 90 dB at 30 cm
          • Vibration
        • Operating Time: Typical 12 h (Bluetooth active)
        • Charging Time: < 4 h
        • Operating Temperature: -20°C to 50°C
        • Pressure: 700 to 1300 mbar (Measurement)
        • Relative Humidity: 10 to 95% r.h.
        • Protection Class: IP68
        • Warranty: Four-Year Limited Warranty
        • Energy Supply: NiMH Battery (Rechargeable)
        • Bluetooth®: Bluetooth 5.0
        • Datalogger: Application of an optimized data compression method with high accuracy and large storage capacity.
        • Keypad: 2 buttons for operation and programming
        • Alarms:
          • Wireless remote alarm notification
          • Audible (95 dB @ 30 cm)
          • Vibration
          • Visible alarm (flashing bright red LEDs)
          • On-screen indication of alarm conditions.
          • Man Down Alarm with pre-alarm and real-time remote wireless notification
        • Datalogging: Continuous datalogging with a three-month capacity
        • Wireless Network:
          • ProRAE Guardian Real-Time Wireless Safety System
          • Loop Network with the EchoView Hos
          • Wireless Range (Typical)
            • ToxiRAE Pro to Mesh Router, EchoView Host, or Mesh Reader 2: ~ 660 feet (200 meters)
            • ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems: ~ 330 feet (100 meters)

          Sensor Type Response Time
          Photoionization sensor with 10.6 eV (standard) or 9.8 eV (optional) lamp. < 15 seconds

          ToxiRAE Pro PID Datasheet

          ToxiRAE Pro PID Quick Reference Guide

          ToxiRAE Pro PID Operating Manual

          Get More Info

          The post ToxiRAE Pro PID appeared first on Electrogas Monitors Ltd..

          ]]>                     MicroRAE™ https://www.electrogasmonitors.com/project/microrae/ Wed, 13 Feb 2019 22:42:31 +0000 https://www.electrogasmonitors.com/?post_type=project&p=2334 The post MicroRAE™ appeared first on Electrogas Monitors Ltd..

          ]]>

          MicroRAE™

          RAE Systems MicroRAE - Multi-Gas Detection - RAE Systems by Honeywell - Electrogas Monitors
          RAE Systems MicroRAE - Multi-Gas Detection - RAE Systems by Honeywell - Electrogas Monitors
          RAE Systems MicroRAE - Multi-Gas Detection - RAE Systems by Honeywell - Electrogas Monitors
          RAE Systems MicroRAE - Multi-Gas Detection - RAE Systems by Honeywell - Electrogas Monitors

          MicroRAE™

          The MicroRAE ™is a wireless multi-gas diffusion monitor that simultaneously measures up to four gases, including H2S, CO, O2 and combustibles (LEL). With its multiple wireless connectivity options the, MicroRAE™ delivers real-time readings, location, and alarm status to other wireless solutions such as the ConneXt.

          Category: [project-category-list]

          Tags: [project-tag-list]

          • Honeywell ConneXt™ compatible with Mesh and Wi-Fi wireless configurations
          • Real-time gas concentration reading, location, alarm and status enabled by state-of-the-art wireless technology
          • Bluetooth® low energy connection to a Smart Phone device for uplink data communication and device configuration
          • Compact and lightweight design
          • IP-67 water- and dust-resistant case
          • Strong, protective, concussion-proof design
          • Unmistakable five-way local and remote wireless notification of alarm conditions
          • Short bump test and calibration time
          • Filtered LEL sensor options to inhibit sensor poisoning
          • Global approval for worldwide acceptance

          • Size: 4.6 x 3.0 (2.6) 3.0 x 0.9 in (117 x 76 (66) 74 x 24mm)
          • Weight: 7.03 oz (206g) (including Li-ion battery and clip)
          • Operating Temperature: -4° to 140° F (-20° to 60° C)
          • Battery: Rechargeable Li-ion
          • Humidity: 0% to 95% relative humidity (non-condensing)
          • Ingress Protection: IP67
          • Alarms and Type:
            • Multi-tone 100dB buzzer (at 11.8"/ 30 cm, typical)
            • Vibration alarm
            • Flashing LEDs
            • On-screen indication of alarm conditions
            • Additional diagnostic alarm
            • Display message for low battery
            • Wireless connectivity alarm
            • Man Down Alarm and real-time remote wireless notification
          • Run Time: 15 hours continuous non-wireless, 11 hours continuous wireless
          • Wireless Range: Up to 650 ft (200m) for sub1GHz Mesh Radio3, Up to 330 ft (100m) for WiFi3, Up to 15 ft (5m) for BLE
          • Data Logging: Continuous datalogging (6 months for 4 sensors at 1-minute intervals); User-configurable datalogging intervals (from 1 to 3,600 seconds)
          • Warranty: 2-year warranty on device and sensors

          Sensor Type Measuring Range Resolution
          H2S 0 - 100 ppm 0 - 50ppm / 0.1ppm; 50 - 100ppm / 1ppm
          CO 0 - 1000 ppm 0 - 250ppm / 1ppm; 250 - 1000ppm / 3ppm
          LEL 0 - 100% LEL 1% LEL
          O2 0 - 30.0% 0.1%
          HCN 0 - 50 ppm 0.2 ppm

          MicroRAE™ Datasheet

          MicroRAE™ Quick Reference Guide

          MicroRAE™ User Manual

          Get More Info

          The post MicroRAE™ appeared first on Electrogas Monitors Ltd..

          ]]>                     QRAE 3 https://www.electrogasmonitors.com/project/qrae-3/ Tue, 27 Feb 2018 05:07:50 +0000 https://www.electrogasmonitors.com/?post_type=project&p=191 The post QRAE 3 appeared first on Electrogas Monitors Ltd..

          ]]>

          QRAE 3

          QRAE 3 - RAE Systems by Honeywell
          QRAE 3 - RAE Systems by Honeywell
          QRAE 3 - RAE Systems by Honeywell
          QRAE 3 - RAE Systems by Honeywell

          QRAE 3

          QRAE 3 is a versatile, rugged, one- to four-sensor pumped or diffusion gas monitor that provides continuous exposure monitoring of oxygen (O2), combustibles, and toxic gases, including hydrogen sulfide (H2S), carbon monoxide (CO), sulfur dioxide (SO2) and hydrogen cyanide (HCN) for workers and respondents in hazardous environments.

          The QRAE 3’s wireless communications capability enables access to real-time instrument readings and alarm status (including man-down alarm) from any location for better visibility and faster response. Real-time hazard readings can also be communicated to the ProRAE Guardian Safety System and the EchoView Host Mini-Controller Closed-Loop Wireless System for safety-enhancing wireless monitoring.

          Category: [project-category-list]

          Tags: [project-tag-list]

          • Real-time gas detector readings and alarm status enabled by state of the art wireless technology
          • Rechargeable Li-ion battery
          • Two Button Operation
          • Built-in pump or diffusion
          • Monochrome graphic display (128 x 80)
          • Unmistakable five-way local and remote wireless notification of alarm conditions
          • Intuitive simple-to-operate two-button user interface
          • Strong, protective, concussion-proof design
          • IP-65/67 water- and dust-resistant case

          • Size:
            • Diffusion: 5.5 H x 3.2 W x 1.5 W inches (140 mm x 82mm x 42mm)
            • Pumped: 5.7 H x 3.2 W x 1.7 D inches (145 mm x 82 mm x 42mm)
          • Weight:
            • Diffusion: 12.9 oz (365 g with Li-ion battery and clip)
            • Pumped: 14.5 oz (410 g with Li-ion battery, clip, and external filter)
          • Operating Temperature: -4° to 122° F (-20° to 50° C)
          • Humidity: 0% to 95% relative humidity
          • Ingress Protection: Pumped IP65 / Diffusion IP67
          • Alarms and Type:
            • Visual
            • Vibrating
            • Audible (95 dB)
            • Low, High, TWA, STEL, OL (over limit)
            • Man Down Alarm
          • Run Time:
            • 14 hours continuous non-wireless, diffusion
            • 11 hours continuous non- wireless, pumped
            • 10 hours continuous with wireless, diffusion
            • 8 hours continuous with wireless, pumped
          • Event Logging: Continuous datalogging (3 months for 4 sensors at 1-minute intervals, 24/7
          • Warranty: 2-year warranty on device; 3-year warranty on LEL, O2, CO, H2S sensors; 1-year warranty on SO2, HCN sensors

          Sensor Type Measuring Range Resolution
          H2S 0 - 100 ppm 0.1 ppm
          CO 0 - 500 ppm 1 ppm
          LEL 0 - 100% LEL 1% LEL
          O2 0 - 30.0% 0.1%
          SO2 0 - 20 ppm 0.1 ppm
          HCN 0 - 50 ppm 0.2 ppm
          NH3 100 ppm 1 ppm
          PH3 20 ppm 0.01 ppm
          CL2 0-50 ppm 0.05 ppm
          NO2 0-50 ppm 0.1 ppm

          QRAE 3 Datasheet

          QRAE 3 Quick Reference Guide

          QRAE 3 User Manual

          Get More Info

          The post QRAE 3 appeared first on Electrogas Monitors Ltd..

          ]]>                     MultiRAE https://www.electrogasmonitors.com/project/multirae/ Thu, 05 Apr 2018 18:11:06 +0000 https://www.electrogasmonitors.com/?post_type=project&p=466 The post MultiRAE appeared first on Electrogas Monitors Ltd..

          ]]>

          MultiRAE

          MultiRAE - RAE Systems by Honeywell
          MultiRAE - RAE Systems by Honeywell
          MultiRAE - RAE Systems by Honeywell
          MultiRAE - RAE Systems by Honeywell

          MultiRAE

          MultiRAE is the most advanced portable chemical detector on the market. With the flexibility of up to six gas sensors and the convenience of wireless portability, this multi-gas monitor is versatile and customizable, while delivering real-time access to instrument readings and alarm status from any location. Choose from 25 sensor options including LEL, PID, NDIR, and exotics that can be easily changed in the field. With five built-in alarms, including man down, and wireless connectivity to your command center, MultiRAE delivers vital information for fast incident response.

          Category: [project-category-list]

          Tags: [project-tag-list]

          • Optional integrated wireless
          • 25 field-interchangeable sensor options
          • Five local and remote alarms, including man down
          • Dust-tight and waterproof (IP65-rated)
          • Rugged design
          • Onboard gas libraries include 190 VOCs and 55 combustible gases
          • Longest battery run-time in its class
          • Intuitive, icon-driven interface
          • Flippable screen
          • Large buttons for easy navigation even with up to three glove layers
          • Continuous data logging — six months for five sensors 24/7
          • Fully automated bump testing and calibration with AutoRAE 2
          • Device Management with Honeywell Sotera™ Express

          • Size: 7.6 x 3.8 x 2.6 inches (193 x 96.5 x 66 mm)
          • Weight: 31 oz (880g)
          • Operating Temperature: -4° to 122° F (-20° to 50° C)
          • Humidity: 0% to 95% relative humidity
          • Battery Options:
            • Rechargeable Li-ion
            • Extended duration Li-ion
            • Alkaline adapter w/4 AA Batteries
          • Operating Hours:
            • Rechargeable: 12 hr. run time
            • Extended: 18 hr. run time
            • Alkaline: 6 hr. run time
          • Alarms:
            • Wireless remote alarm notification
            • Audible: 95dB @ 30cm
            • Vibration
            • Visible (Flashing bright red LEDs)
            • On-screen notifcation of alarm conditions
            • Man Down Alarm with pre-alarm and real-time remote wireless notification
          • IP Rating: !P-65, unit running
          • Datalogging: Continuous (6 months for 5 sensors at one-minute intervals)
          • Sampling Pump: Built in pump; Average flow rate: 250 cc/min.
          • Low Flow Alarm: Auto shut-off pump at low-flow condition
          • Warranty:
            • 2 years on non-consumable components and catalytic LEL, CO, H2S and O2 sensors
            • 1 year on all other sensors, pump, battery and other consumables

          Sensor Type Measuring Range Resolution
          VOC 10.6 eV 0 - 5000 ppm 0.1 ppm
          LEL (catalytic) 0 - 100% LEL 1% LEL
          NDIR (0-100% LEL Methane) 0 - 100% LEL 1% LEL
          NDIR (0-100% Vol. Methane)> 0 - 100% Vol. 0.1% Vol
          CO2 0 - 50000 ppm 100 ppm
          NH3 0 - 100 ppm 1 ppm
          CO 0 - 500 ppm 1 ppm
          CO (Ext. Range) 0 - 2000 ppm 10 ppm
          CO (H2 Comp.) 0 - 2000 ppm 10 ppm
          CO+H2S Combo 0 - 500 ppm CO; 0 - 200 ppm H2S 1 ppm CO; 0.1 ppm H2S
          Cl2 0 - 50 ppm 0.1 ppm
          ClO2 0 - 1 ppm 0.03 ppm
          EtO-A 0 - 100 ppm 0.5 ppm
          EtO-B 0 - 10 ppm 0.1 ppm
          HCHO 0 - 10 ppm 0.05 ppm
          HCN 0 - 50 ppm 0.5 ppm
          H2S 0 - 100 ppm 0.1 ppm
          CH3-SH 0 - 10 ppm 0.1 ppm
          NO 0 - 250 ppm 0.5 ppm
          NO2 0 - 20 ppm 0.1 ppm
          O2 0 - 30% 0.1%
          PH3 0 - 20 ppm 0.1 ppm
          SO2 0 - 20 ppm 0.1 ppm

          MultiRAE Datasheet

          MultiRAE Series Operating Manual

          MultiRAE (Pumped) Quick Reference Guide

          Get More Info

          The post MultiRAE appeared first on Electrogas Monitors Ltd..

          ]]>                     ppbRAE 3000+ https://www.electrogasmonitors.com/project/ppbrae-3000/ Wed, 27 Oct 2021 21:04:46 +0000 https://www.electrogasmonitors.com/?post_type=project&p=4991 The post ppbRAE 3000+ appeared first on Electrogas Monitors Ltd..

          ]]>

          ppbRAE 3000+

          ppbRAE 3000+ - Specialty Gas Detection - RAE Systems - Electrogas
          ppbRAE 3000+ - Specialty Gas Detection - RAE Systems - Electrogas
          ppbRAE 3000+ - Specialty Gas Detection - RAE Systems - Electrogas
          RAE_Systems_Product_Logo

          ppbRAE 3000+

          Portable Handheld VOC Monitor

          The compact ppbRAE 3000 + is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 + is one of the most advanced handheld VOC monitors available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

          A rugged housing, large display, and large keys that can be operated with three layers of gloves all make for a unit that’s easy to use and maintain. ppbRAE 3000 + is solution-oriented through multiple connected options. A dedicated mobile APP has been developed for survey applications.

          Category: [project-category-list]

          Tags: [project-tag-list]

          • Accurate VOC measurement in all operating conditions
          • Easy access to lamp and sensor in seconds without tools
          • Patented sensor and lamp autocleaning reduce maintenance
          • Monitors real-time readings and location of people
          • 3-year 10.6 eV lamp Warranty
          • BLE module and dedicated APP for enhanced datalogging function
          • 3-Second response time
          • Extended range from 1 ppb to 10,000 ppm with highly acute linearity
          • Humidity compensation with integral humidity
          • Large graphic display presents gas type, correction factor and concentration
          • Easy to access battery, lamp and sensor (without tools)
          • Rugged housing

          • Size: 10 L x 3.0 W x 2.5 H inches (25.5 x 7.6 x 6.4 cm)
          • Weight: 26 oz (738 g)
          • Operating Temperature:-4° to 113° F (-20° to 50° C)
          • Humidity: 0 to 95% relative humidity (non-condensing)
          • Sensors: Photoionization sensor with standard 10.6eV lamp
          • Battery Options:
            • Alkaline battery adapter
            • External field-replaceable lithium-ion battery pack, if specified
          • Operating Hours:
            • 12 hours of operation on an alkaline battery adapter
            • 16 hours with a lithium-ion battery pack
          • Display Graphic: 4 Lines, 28 x 43 mm, with LED backlight
          • Keypad: 1 operation and 2 programming keys, 1 flashlight ON/OFF
          • Alarms:
            • 95 dB buzzer (at 30 cm) and flashing red LED to indicate exceeded preset limits
            • High: 3 beeps and flashes per second
            • Low: 2 beeps and flashes per second
            • Alarm latching with manual override or automatic reset
            • Additional diagnostic alarm and display message for low battery and pump stall
          • IP Rating: IP-65 (while in operation)
          • Datalogging: Standard 6 months at 1-minute intervals
          • Sampling Pump:
            • Internal, integrated flow rate: 500 cc/min.
            • Sample from 100 ft. (30m) horizontally or vertically
          • Low Flow Alarm: Auto shut-off pump at low-flow conditions
          • Warranty: 3 years for 10.6eV lamp, 1 year for pump, battery and instrument

          Sensor Type Measuring Range Resolution
          VOCs 0 - 9,999 ppb 1 ppb
          VOCs 10 - 99 ppm 0.01 ppm
          VOCs 100 - 999 ppm 0.1 ppm
          VOCs 1,000 - 9,999 ppm 1 ppm

          ppbRAE 3000+ Datasheet

          ppbRAE 3000+ Quick Reference Guide

          ppbRAE 3000+ Operating Manual

          Get More Info

          The post ppbRAE 3000+ appeared first on Electrogas Monitors Ltd..

          ]]>                     MultiRAE Lite https://www.electrogasmonitors.com/project/multirae-lite/ Thu, 05 Apr 2018 20:00:30 +0000 https://www.electrogasmonitors.com/?post_type=project&p=476 The post MultiRAE Lite appeared first on Electrogas Monitors Ltd..

          ]]>

          MultiRAE Lite

          MultiRAE Lite - RAE Systems by Honeywell
          MultiRAE Lite - RAE Systems by Honeywell
          MultiRAE Lite - RAE Systems by Honeywell

          MultiRAE Lite

          The MultiRAE Lite provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor sufficient oxygen levels, making it an excellent choice for personal protection and leak detection in a range of industries and applications. The wireless connection sends threat and alarm data in real time to a central command, providing superior awareness for fast incident response. And its replaceable sensors, alarm, and battery, large screen, and automated bump testing and calibration make it easy to use and maintain.

          Category: [project-category-list]

          Tags: [project-tag-list]

          • Multi-gas monitor for 1-6 gases
          • Pumped and diffusion models available
          • Man down alarm
          • More than 25 different chemical sensors
          • Fully automatic bump testing and calibration
          • Real-time access to readings at central command
          • Swap out sensors as needed
          • Simple maintenance with replaceable sensors, pump, and battery
          • 5-way local and remote wireless alarm
          • Multi-language capability – up to 18 languages

          • Size:
            • Pumped: 7.6 x 3.8 x 2.6 inches (193 x 96.5 x 66 mm)
            • Diffusion: 6.9 x 3.8 x 2.2 (175 x 96.5 x 56 mm)
          • Weight:
            • Pumped: 31 oz (880g)
            • Diffusion: 26.8 oz (760g)
          • Operating Temperature: -4° to 122° F (-20° to 50° C)
          • Humidity: 0% to 95% relative humidity
          • Battery Options:
            • Rechargeable Li-ion
            • Extended duration Li-ion
            • Alkaline adapter w/4 AA Batteries
          • Operating Hours:
            • Rechargeable: 12 hr. run time
            • Extended: 18 hr. run time
            • Alkaline: 6 hr. run time
          • Alarms:
            • Wireless remote alarm notification
            • Audible: 95dB @ 30cm
            • Vibration
            • Visible (Flashing bright red LEDs)
            • On-screen notifcation of alarm conditions
            • Man Down Alarm with pre-alarm and real-time remote wireless notification
          • IP Rating: !P-65, unit running
          • Datalogging: Continuous (6 months for 5 sensors at one-minute intervals)
          • Sampling Pump: Built in pump or Diffusion
          • Low Flow Alarm: Auto shut-off pump at low-flow condition
          • Warranty:
            • 2 years on non-consumable components and catalytic LEL, CO, H2S and O2 sensors
            • 1 year on all other sensors, pump, battery and other consumables

          Sensor Type Measuring Range Resolution
          VOC 10.6 eV 0 - 1000 ppm 1 ppm
          LEL (catalytic) 0 - 100% LEL 1% LEL
          NDIR (0-100% LEL Methane) 0 - 100% LEL 1% LEL
          NDIR (0-100% Vol. Methane)> 0 - 100% Vol. 0.1% Vol
          NH3 0 - 100 ppm 1 ppm
          CO2 0 - 50000 ppm 100 ppm
          CO 0 - 500 ppm 1 ppm
          CO (Ext. Range) 0 - 2000 ppm 10 ppm
          CO (H2 Comp.) 0 - 2000 ppm 10 ppm
          CO+H2S Combo 0 - 500 ppm CO; 0 - 200 ppm H2S 1 ppm CO; 0.1 ppm H2S
          Cl2 0 - 50 ppm 0.1 ppm
          ClO2 0 - 1 ppm 0.03 ppm
          EtO-A 0 - 100 ppm 0.5 ppm
          EtO-B 0 - 10 ppm 0.1 ppm
          HCHO 0 - 10 ppm 0.05 ppm
          HCN 0 - 50 ppm 0.5 ppm
          H2S 0 - 100 ppm 0.1 ppm
          CH3-SH 0 - 10 ppm 0.1 ppm
          NO 0 - 250 ppm 0.5 ppm
          NO2 0 - 20 ppm 0.1 ppm
          O2 0 - 30% 0.1%
          PH3 0 - 20 ppm 0.1 ppm
          SO2 0 - 20 ppm 0.1 ppm

          MultiRAE Lite Datasheet

          MultiRAE Lite (Diffusion) Quick Start Guide

          MultiRAE Series Operating Manual

          Get More Info

          The post MultiRAE Lite appeared first on Electrogas Monitors Ltd..

          ]]>