• Monitor gas detector readings from anywhere with real-time monitoring software
• More accurate decisions knowing the location of the worker
• Alarm notifications
• Compliance level, notification of bump and calibration level provided through software
• Easy setup
• Compatible with Honeywell BW™ MicroClip XL, Honeywell BW™ MicroClip X3, Honeywell BW™ Max XT II
• Seamlessly integrates with the Safety Communicator App
• Alarm notifications
• Enables quick reaction
• Enhances situational awareness
• 1-year runtime (non-replaceable battery)
• Global intrinsic safety and wireless certifications

• Size: 39 x 35 x 10.6 mm
• Weight: 21.5g
• Battery runtime: Up to 12 months, non-rechargeable
• Warranty: 1 year warranty
• Display: Red & green LEDs
• Technology: Bluetooth® low energy (BLE)
• Wireless range: Up to 10 m/ 33' (with line of sight)
• IP rating: IP66/IP68
• Operational temperature: -20˚C to +55˚C / -4˚F to +131˚F
• Certification temperature: -40˚C to + 55˚C / -40˚F to +131˚F
• Humidity: 5% - 95% RH (Non-Condensing)

Honeywell BW™ Connect Datasheet

Honeywell BW™ Connect Installation Guide

• User-friendly operation
• Easy-to-read display for multiple languages
• Lightweight convenience
• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Data logging with rolling 24-hour peak reading
• Ease of maintenance - no need to take it apart to replace sensors, batteries and sensor filters
• The new 1-Series sensor for enhanced reliability
• Connected Bluetooth Low Energy (BLE) capabilities
• High standards of sensor quality and reliability
• The easiest single-gas detector to service
• The first single-gas detector with the 1 Series sensor for CO, H2S, and O2
• Complete with an extensive selection of sensor options
• Compatible with IntelliDoX

• Size:
  • 2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models)
  • 2.7 x 2.6 x 1.6 in. / 7.0 x 6.7x 4.1 cm (4-Series sensor models)
• Weight: 3.6 to 4.1 oz. / 103 to 116 g, depending on the installed sensor
• Humidity: 0% - 95% RH (non-condensing)
• Alarms: Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, non-compliance
• Tests:
  • Sensor integrity
  • Circuitry
  • Battery (Continous)
  • Audible/visual alarms on activation
• Ingress Protection: IP66/68
• Typical battery life: 12 months (6 months for 1-Series O₂)
• User options:
  • • Reset TWA, STEL and Peak readings
  • Change High, Low, TWA and STEL alarm setpoints
  • Latching alarms
  • Enable IntelliFlash and non-compliance indicators
  • Set calibration and/or bump test reminders
  • Assign worker and location assignments
  • Calibration past due lockout
• Warranty:
  • 3 years for 1-Series detectors and sensors (H₂S, CO, O₂)
  • 2 years for 4-Series detectors and sensors
  • 1 year for NH₃, Cl₂, O₃, ETO, ClO₂ sensors

Honeywell BW™ Solo Datasheet

Honeywell BW™ Solo Quick Reference Guide

Honeywell BW™ Solo User Manual

• Available in a two-year or three-year version for H2S or CO
• Available in a two-year version for O2 or SO2
• Unique hibernation case extends service life for the two-year H2S or CO
• Compact, lightweight and easy to use — with one-button operation and no extensive training
• Automated internal test for improved safety
• Automatically logs the 35 most recent gas events for easy, accurate recordkeeping
• Compatible with MicroDock II docking station and Fleet Manager II software
• Both detectors are compatible with the IntelliDoX instrument management system for extremely quick bump tests, bump test tracking, adjustable set points and more.

• Size: 1.6 x 2.0 x 3.4 in. / 4.1 x 5.0 x 8.7 cm
• Weight: 3.2 oz. / 92 g
• Alarms: Visual, vibrating, audible (95 dB); Low, High
• Temperature:
  • H₂S: -40 to +122°F / -40 to +50°C
  • CO: -22 to +122°F / -30 to +50°C
  • O₂: -4 to +122°F / -20 to +50°C
  • SO₂: -22 to +122°F / -30 to +50°C
• Humidity: 5% - 95% RH (non-condensing)
• Typical battery life: Two years (H₂S, CO, O₂ or SO₂) or three years (H₂S or CO) depending on the version
• Tests: Activated detectors automatically perform one internal diagnostic test every 24 hours
• Warranty: Two or three years from activation (given normal operation), plus one year shelf life (6 months for O₂). Up to three years for two-year H₂S and CO detectors when used with the hibernation feature, limited to 24 months of detector operation
• Event Logging: 35 most recent events

BW Clip Series Datasheet

BW Clip Operating Manual

BW Clip Real Time Operating Manual

• 2 months of battery runtime on a 4.5-hour charge
• The latest in low power LEL infrared technology
• 1-Series sensor technology giving you wider temperature working conditions and a 5-year expected life
• Up to 4 months if you turn off the detector at the end of each shift
• No daily charging, no unexpected downtime
• No service required, activate and use for two years
• Bluetooth included for ease of downloading and sending reports via the Safety Suite App
• Small, lightweight, and wearable
• One-button operation
• IntelliFlash™ green light indicates the detector is in compliance
• Amber light indicates the need for maintenance
• Compatible with IntelliDoX and Honeywell Safety Suite
• Compatible with TouchConnect, using Bluetooth® for wireless configuration

• Size: 4.29 in x 2.44 in x 1.7 in / 108.2 mm x 61.5 mm x 43.2 mm (with Alligator Clip)
• Weight: 185 g (6.5 oz) with Alligator Clip
• Working Temperature: -40°C to 60°C (-40°F to 140°F)
• Working Humidity: 5% to 95%
• Ingress Protection: IP66, IP68
• Alarms and Type:
  • Visual, Vibrating, Audible (95dB)
  • Low, High, TWA, STEL
  • Negative Drift, Over Limit, Multi-Alarm
• Self-Test:
  • Perform diagnostic of sensors, circuitry on activation
  • Activated detector automatically performs an analog sensor diagnostic every 10 mins.
• Typical Battery Life: Two months (w/NDIR CH4 sensor)
• Device Warranty: Two-year warranty for sensors and detector

Honeywell BW™ BW Icon Datasheet

Honeywell BW™ Icon Operating Manual

Honeywell BW™ Icon Quick Reference Guide

• 2 months of battery runtime on a 4.5-hour charge
• The latest in low power LEL infrared technology
• 1-Series sensor technology giving you wider temperature working conditions and a 5-year expected life
• Up to 4 months if you turn off the detector at the end of each shift
• No daily charging, no unexpected downtime
• No service required, activate and use for two years
• Bluetooth included for ease of downloading and sending reports via the Safety Suite App
• Small, lightweight, and wearable
• One-button operation
• IntelliFlash™ green light indicates the detector is in compliance
• Amber light indicates the need for maintenance
• Compatible with IntelliDoX and Honeywell Safety Suite
• Compatible with TouchConnect, using Bluetooth® for wireless configuration

• Size: 4.29 in x 2.44 in x 1.7 in / 108.2 mm x 61.5 mm x 43.2 mm (with Alligator Clip)
• Weight: 185 g (6.5 oz) with Alligator Clip
• Working Temperature: -40°C to 60°C (-40°F to 140°F)
• Working Humidity: 5% to 95%
• Ingress Protection: IP66, IP68
• Alarms and Type:
  • Visual, Vibrating, Audible (95dB)
  • Low, High, TWA, STEL
  • Negative Drift, Over Limit, Multi-Alarm
• Self-Test:
  • Perform diagnostic of sensors, and circuitry on activation
  • Activated detector automatically performs an analog sensor diagnostic every 10 mins.
• Typical Battery Life: Two months (w/NDIR CH4 sensor)
• Device Warranty: Two-year warranty for sensors and detector

Honeywell BW™ BW Icon+ Datasheet

Honeywell BW™ Icon+ Operating Manual

Honeywell BW™ Icon+ Quick Reference Guide

• 2 months of battery runtime on a 4.5-hour charge
• The latest in low power LEL infrared technology (immune to silicone poisoning
• i-Series sensor technology which monitors sensor stats and provides advanced predictive calibration, maintenance, and end-of-life information in real-time
• Compatible with the IntelliDoX instrument management system
• Compatible with Honeywell Safety Suite using Bluetooth®
• IntelliFlash™ green light indicates when the detector is in compliance
• Amber light indicates the need for maintenance
• 1-series sensors respond to dangerous gas levels in seconds, even in harsh temperatures
• Small, lightweight, and wearable
• One-button operation

• Size: 4.29 x 2.44 x 1.7 in. / 108.2 mm x 61.5 mm x 43.2 mm (with Alligator Clip)
• Weight:
  • 189 g (6.7 oz) with Catalytic LEL and Alligator Clip
  • 186 g (6.6 oz) with IR LEL and Alligator Clip
• Working Temperature: -40°C to 60°C (-40°F to 140°F) with Catalytic LEL sensor
• Working Humidity: 5% to 95%
• Ingress Protection: IP66, IP68
• Alarms and Type:
  • Visual, Vibrating, Audible (95dB)
  • Low, High, TWA, STEL
  • Negative Drift, Over Limit, Multi-Alarm
• Self-Test:
  • Perform diagnostic of sensors, circuitry on activation
  • Activated detector automatically performs an analog sensor diagnostic every 10 mins.
• Typical Battery Life: 40 days @ 8 hours of use per day with IR LEL or 15 hours per day with Catalytic LEL (with NDIR CH4 sensor)
• User Options:
  • Change High, Low, TWA and STEL alarm points
  • Latching alarms
  • Set Calibration and/or bump test reminders
  • Assign worker and location assignments
  • Always on
  • User options only available via Device Configuration and Safety Suite Device Configurator
• Device Warranty: Three-year warranty for sensors and detector

**Caution: The infrared LEL sensor used in Honeywell BW™ Flex cannot detect hydrogen and acetylene. For applications involving these combustible gases, please specify the catalytic type LEL sensor.

Honeywell BW™ Flex Datasheet

Honeywell BW™ Flex Operating Manual

Honeywell BW™ Flex Quick Reference Guide

• IntelliFlash verifies operation and compliance to both the user and supervisors from up to 20 ft. / 6.1 m
• One-button operational simplicity
• Simultaneously monitor for up to four gases including O₂, H₂S, CO and combustibles
• New IP68 rating for unmatched water protection, giving workers the confidence that it will stand up to challenging conditions.
• Guaranteed run-time for at least a 12-hour shift — down to -20°C — without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery — tested to last in extreme environments
• Ergonomic and wearable — doesn’t weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons

• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup

• Size: 11.3 x 6.0 x 3.2 cm / 4.4 x 2.4 x 1.2 inches
• Weight: 190 g / 6.7 oz; 179 g / 6.3 oz.
• Temperature: -20 to +50°C / -4 to +122°F
• Humidity: 0% - 95% RH (non-condensing)
• Alarms:
  • Visual
  • Vibrating
  • Audible (95 dB)
  • Low, High, TWA, STEL, OL (over limit)
• Tests:
  • Audible/visual alarms on activation
  • Sensors
  • Battery and Circuitry (continuous)
• Typical Battery Life:
  • 18 hours; recharges in less than 6 hours (**Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles. Refer to the Operator’s Manual for additional information**)
• Warranty:
  • Full two-year (GasAlertMicroClip XL) or three-year (GasAlertMicroClip X3) warranty including all sensors
  • Note: Battery is guaranteed to have 12 hour runtime during warranty period under normal operating temperature of 4°F / -20°C to 122°F / 50°C
• User Options:
  • Confidence beep
  • Set STEL interval
  • Sensor on/off
  • Latching alarms
  • Safe display mode
  • Stealth mode
  • Calibration lock
  • Auto zero on start up
  • O² Auto calibration on start up
  • Set bump test interval
  • Force bump test when overdue
  • IntelliFlash™ interval
  • Combustible gas measurement (%LEL or % by volume methane)
  • User-settable calibration gas level
  • Force calibration when overdue
  • Low alarm acknowledge
  • Language choices
  • Set custom start up message
• Ratings:
  • IP68 – up to 45 minutes at 1.2 m (GasAlertMicroClip XL and X3)
  • EMI/RFI: Complies with EMC Directive 2004/108/EC.

• Expected Service Lifetime
  • Five years including all sensors* (GasAlertMicroClip X3 only)

GasAlert MicroClip Series Datasheet

GasAlert MicroClip Series Quick Reference Guide

GasAlert MicroClip Series User Manual

• IntelliFlash verifies operation and compliance to both the user and supervisors from up to 20 ft. / 6.1 m
• One-button operational simplicity
• Simultaneously monitor for up to four gases including O₂, H₂S, CO and combustibles
• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Integrated sampling pump with reliable diaphragm technology
• Best in class block detection with semi-conductor pressure sensor
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your detector with Fleet Manager II
• Equipped with standard datalogging and event logging

• Size: 5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cm
• Weight: 11.5 oz. / 328 g
• Temperature: -4 to 122ºF / -20 to 50ºC
• Humidity: 10 - 100% RH (non-condensing)
• Alarms:
  • Visual
  • Vibrating
  • Audible (95dB)
  • Low, High, STEL, TWA, OL (over limit), Low Battery, Pump
• Tests:
  • Audible/visual alarms on activation
  • Sensors
  • Battery, Pump and Circuitry (continuous)
• Typical battery life:
  • 13 hours @ 32ºF / 0ºC; 8 hours @ -4ºF / -20ºC
  • Recharges in 6 hours
• Pump draw:
  • Sample from up to 75 ft. / 23 m
• Warranty: Full two year warranty including all sensors
• User options:
  • Confidence beep
  • Safety (sensor) lock
  • Latching alarms
  • Safe display mode
  • Calibration IR lock
  • Location selection
  • Force block test
  • Force bump test when overdue
  • Force calibration when overdue
  • Sensor configuration
  • Detector identification
  • Low alarm acknowledge
  • Language choices (five)
  • Set custom start-up message
  • Confidence interval
  • Datalog interval
• Ratings:
  • • Ingress Protection EMI/RFI: Complies with EMC Directive 2004/108/EC IP66/67

GasAlert MaxXT II Datasheet

GasAlert MaxXT II Quick Reference Guide

GasAlert MaxXT II User Manual

• Durable, ergonomic and wearable — doesn’t weigh you down
• Compact profile — even working in tight spaces, you won't know you are wearing it
• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD
• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms
• Compatible with IntelliDoX docking system and instrument management system
• Built-in concussion proof boot
• Tested to last in extreme environment

• Size: 4.7 x 2.7 x 1.3 inches / 12.0 x 6.8 x 3.2 cm
• Weight: 8.2 oz. / 233 g
• Operating Temperature: -4 to +131°F / -20 to +50°C
• Humidity: 5 - 95% RH (non-condensing) continuous
• Ingress Protection: IP68
• Alarms and Type:
  • Visual
  • Vibrating
  • Audible (95 dB)
  • Low, High, TWA, STEL, OL (over limit)
• Self-Test: Activated detectors automatically perform one internal diagnostic test every 24 hours (sensors, battery, and circuitry).
• Typical Battery Life: Two years, Continuous Operation
• Event Logging: 70 most recent events
• User Options:
  • Adjust STEL period (5-15 minutes in 1 minute intervals)
  • Calibration span levels
  • Calibration interval
  • Bump test interval
  • Select combustible gases measurement: 0-100% LEL (Lower Explosive Limit) or Methane gas 0-5.0% v/v
  • Calibration due date (1 to 365 days, or set to zero for off)
  • Individual sensor enable/disable
  • Latching alarms
  • Stealth mode
• Warranty: Full two-year warranty including sensors and battery

BW Clip4 Datasheet

BW Clip4 Quick Start Guide

BW Clip4 Operating Manual

• Tamper-proof operation with one button operation
• Intuitive LCD icons for quick decision making
• Easy service and maintenance
• Intuitive large dot matrix display giving clear readings
• Smart Gas layout for clear sensor reading
• Hole Watch Mode for quick decision making
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance
• Honeycomb-designed housing for extra ruggedness
• Scratch-resistant display protector
• Honeywell Connected Worker compatible
• Honeywell TouchConnect™ Technology for activating a feature
• Honeywell SafetySuite for unit configuration and reporting
• Light, rugged & ergonomically designed for easy use
• Quick responding sensor technology
• Quick bump & calibration with IntelliDoX system

• Size: 5.8 x 3.3 x 1.6 inches. / 14.8 cm x 8.5 cm x 4.0 cm
• Weight: 14.5 oz (411 g) (with clip)
• Temperature: -4°F to 131°F / -20°C to +50°C
• Relative Humidity: 5% - 95% RH (non-condensing)
• Alarms and Type: Visual, vibrating, audible (95 dB), Low, High, TWA, STEL, OL
• Battery Life: 18 Hours (14 Hours with PID or IR sensor)
• Pump Draw: Sample from up to 75 ft / 22.9m
• Connected Worker:
  • Bluetooth Low Energy connects to Honeywell's Safety Communicator App
  • Honeywell TouchConnect™ - Easy ability to enter bump or calibration mode
• Datalogging: 45 days based on 8-hour shifts every 15 seconds logging
• Ingress Protection: IP66/68
• Warranty:
  • Instrument: 3 years
  • Sensors: 3 years (2 years for NH₃, 1 year PID and Cl₂
  • Battery: 2 years

Honeywell BW™ Ultra Datasheet

Honeywell BW™ Ultra Quick Reference Guide

Honeywell BW™ Ultra User Manual

Google Play Store - Safety Communicator by Honeywell International

Apple App Store - Safety Communicator by Honeywell International