Air Light®

DC Powered Portable LED Light Series

Air Light® DC powered Portable Area Lighting Systems are designed to provide high-power LED lighting for both indoor and the most adverse outdoor conditions. The compact portable design comes fully assembled for use and deploys rapidly in under 30 seconds without the need for component assembly. A stable platform ensures reliable lighting on rugged terrain and high wind conditions. All lights can be used in dusty & wet environments!

Air Light® Applications

• Area Lighting
• Construction
• Maintenance
• Utility Work
• Emergency Response Lighting
• Crime Scene Investigation

Category: [project-category-list]

Tags: [project-tag-list]

Air Light® II

DC Powered Portable LED Light Series

Air Light® II DC-powered Portable Area Lighting Systems are designed to provide high-power LED lighting for both indoor and the most adverse outdoor conditions. The compact portable design comes fully assembled for use and deploys rapidly in under 30 seconds without the need for component assembly. A stable platform ensures reliable lighting on rugged terrain and high wind conditions. All lights can be used in dusty & wet environments!

Air Light® II Applications

• Temporary or Emergency Lighting
• Emergency Response
• Highway Response
• Power Outage
• Construction
• Maintenance
• Utility Work
• Emergency Response Lighting
• Crime Scene Investigation

Category: [project-category-list]

Tags: [project-tag-list]

Breather Box®

High Performance Portable Grade-D Breathing Air Filtration System

The Breather Box® is a portable Grade-D filtration system designed to provide breathing air for a specific number of workers. The system filters incoming air from a compressor to provide ­respirator users with Grade-D quality air and ­monitors for CO and/or Oxygen.

The first stage element filters bulk water and particulate and have an auto drain. The second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain. The third stage filter removes organic vapors and odors and has a manual drain. Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% @ .01 micron. All Breather Boxes® are designed to be used in the upright and closed position to prevent internal contamination.

The standard carbon monoxide (CO) airline monitor operates on disposable 9-volt batteries, 8-16 volt DC, or 115 VAC for continuous air monitoring. An external audible alarm and light signal the workers of high CO content. A remote alarm jack is provided on all models except for Model BB15-CO. Point-of-Attachment (POA) boxes can extend respirator usage beyond 300 feet.

Category: [project-category-list]

Tags: [project-tag-list]

Tech-Rescue™ Cart

Versatile Air Supply for Fire and Technical Rescue Teams

The Tech-Rescue™ Cart is specifically engineered to provide essential air support for respirators and rescue tools used by fire and technical rescue teams. This robust stainless steel cart features a user-friendly, color-designated control panel: one side dedicated to primary respirator breathing air, and the other side for tool and rescue air requirements.

Designed for flexibility, the Tech-Rescue™ Cart can operate using either two 4500 psi cylinders or a remote high-pressure cascade cylinder air system. This functionality makes the Tech-Rescue™ Cart the most versatile air cart available in the fire service industry, ensuring reliable and efficient air supply during critical rescue operations.

Category: [project-category-list]

Tags: [project-tag-list]

Auto-Air™ Cart

The Auto-Air™ Cart provides a systems approach to breathing air filtration. One cart contains our Grade-D filtration unit, either a pneumatic or electric reserve air system and twin air cylinder storage. Choose a cart size based on the desired amount of reserve air needed to allow workers to safely egress the work area. Carts can operate with either 2400 or 5000-psi cylinders. The pneumatic version should be selected for hazardous environments

Intrinsically Safe Auto-Air™ Cart Complete Pneumatic Operation

Applications:

• Refineries
• Chemical and Pharmaceutical manufacturing
• Refueling applications
• Tank cleaning
• Decon required situations
• Grain silo entry

Standard Electric Model

Applications:

• Confined space entry
• Hazardous material handling
• Boiler cleaning operations
• Nuclear work
• Fuel cell maintenance
• Tank entry and cleaning

Category: [project-category-list]

Tags: [project-tag-list]

Blast-Air™ Cart

Designed for the Commercial Sandblasting, Paint and Coatings Industry

The Blast-Air™ Cart has been designed to meet the demanding needs of the sandblast and coatings industry. The Blast-Air™ 50 pictured the standard 4 worker Breather Box mounted on a BA-1CAA pre-filter cart. Air can also be supplied to the cart from mobile or plant air compressors and pre-filtered through high capacity water, oil, and particulate separators located on the rear of the rugged steel cart.

These pre-filters automatically drain large amounts of oil and water discharged from a compressor before it enters the Breather Box. This process extends the filter life of the Breather Box and reduces maintenance downtime and costs.

Category: [project-category-list]

Tags: [project-tag-list]

Custom Fire & Rescue Air Trailers

Custom Mobile Breathing Air Response Systems

At Air Systems, our experienced technical staff and engineering department are dedicated to designing mobile breathing air response systems tailored to your exact requirements. Our team collaborates closely with Electrogas, combining expertise and innovative technology to deliver solutions that meet the highest safety and performance standards.

Whether you need a system for emergency response, industrial applications, or specialized rescue operations, we ensure each design is optimized for reliability and efficiency. Trust Air Systems and Electrogas to provide a mobile breathing air solution that perfectly fits your needs.

Complete the design questionnaire (found below under documentation), submit it to your local sales rep and Air Systems and Electrogas we will provide AutoCAD® drawings, specifications and pricing.

Category: [project-category-list]

Tags: [project-tag-list]

MACK™ – Multi Air Command Kits

Portable Air Distribution for Fire and Rescue

The MACK™ System is a portable air distribution box designed to meet the demanding needs of the Fire, Rescue, and Emergency Response industries. Developed and tested by professional firefighters, each unit complies with NFPA requirements.

Key Features:

• MACK-1™ Basic Functions: Utilizes one or two SCBA cylinders to supply air.
• High Pressure Inlet: CGA-347 inlet for continuous operation from truck-mounted air cylinders.
• Low Pressure Regulator: Provides 0-125 psi air to a four-outlet respirator manifold.
• Standard Safety Features: Includes a low-pressure alarm whistle and a DC lamp for interior illumination.

The MACK™ System offers emergency low-pressure breathing air from SCBA cylinders or vehicle-mounted storage cylinders. Advanced models feature multiple air pressure regulators for confined space rescue, mid-range pressure for rescue tools, and high-pressure emergency air cylinder filling systems.

Choose from standard MACK™ units or customize one to meet your department’s air handling needs.

Category: [project-category-list]

Tags: [project-tag-list]

Air-Responder™

Custom Mobile Breathing Air Trailers

The AIR RESPONDER™ series offers cost-effective, mobile breathing air solutions for quick response. Designed to support airline respirators, rescue air tools, and SCBA quick filling, these trailers are available in two configurations:

• 100 Series: Open frame with six cylinders.
• 200 Series: Enclosed frame with eight cylinders

Both series feature weatherproof air control panels made of marine board or painted metal for durability. Additional options include hose reels, storage boxes, frag tubes, and various air pressure settings.

Air Systems, in collaboration with Electrogas, can customize an Air-Responder™ trailer to meet your specific needs and applications.

Category: [project-category-list]

Tags: [project-tag-list]

Cascade Cylinder Fill Assemblies

Air Systems’ cascade cylinder fill assemblies are used for refilling either 2216 or 4500psi SCBA cylinders. Fill assemblies include a 5 ft. high pressure fill whip with gauge, universal hand-tight nut, on/off and bleed valve. Cylinder connecting whips are supplied with a CGA stem, nut, and tee assembly. Additional cylinder connecting whips can be added to the assemblies for multiple or extended SCBA fill capacity.

Category: [project-category-list]

Tags: [project-tag-list]