X-AM® Mark II Pump

X-AM® Mark II Pump

The Dräger X-AM® Mark II Pump is a high-efficiency external pump designed for use with the Dräger X-am® 2500, 5000, and 5600 portable gas detectors. The pump automatically switches on when it is connected to a running X-am® device, and its fast and easy changeover from pump mode to diffusion mode makes it ideal for clearance measurements in tanks and shafts.

The pump can reach the ambient atmosphere in inaccessible places—up to a distance of 45 m/147 feet, e.g. in channels, shafts, or tank systems. The pump has been optimized for hoses with a diameter of 3 mm/0.12 in—for fast response times and low power consumption.

Category: ,


  • Rechargeable battery (charging via micro-USB port)
  • Easy to use - no buttons
  • X-AM® interface with self-starting pump
  • Connection for hoses with 3 or 5 mm in diameter and up to 45 m /147 ft. in length
  • Visible at all times for easy inspection - no cover removal required
  • Warning signals on your X-AM® gas detector remain visible at all times
  • Fastening clip - for gas and safe connection to any X-AM® 2500, 5000 or 5600 device
  • Ex Zone 0 Approved

  • Dimensions: 2.6 x 6.9 x 1.5 inches.
  • Weight: 7.1 ounces (approx. 200g)
  • Operating Temperature: -20ºC to 50ºC
  • Allowable Ambient Temperature When Charging: 0 to 35ºC
  • Charing Time: < 6 hours
  • Operating Time: > 20 hours, depending on application and temperature
  • Maximum Hose Length: 45m
  • Air Flow Volume: 0.4 L/min
  • Storage Temperature: -20ºC to 45ºC
  • Pressure: 700 to 1,300 hPa
  • Air Humidity: 0 to 95% RH
  • IP Protection Class: IP67