X-AM 3500

Dräger X-AM 3500

X-AM 3500 is specially designed for clearance measurements and personnel monitoring applications. The 1 to 4 gas detector reliably detects flammable gases and vapours as well as O2, CO, H2S, NO2 and SO2. The innovative signalling design and extensive range of accessories ensure optimum safety and easy handling.

Category: ,

Tags: ,

  • Specially designed for use with a pump, optimized for clearance measurement
  • Connected with hoses up to 147 ft (45 meters) long
  • Intuitive to operate with one-handed operation using three function keys
  • Clear signalling design: 
    • Red light = gas alarm
      Yellow light = device-related alarm, e.g. low battery
      Green light = device is ready for use
      A loud horn (100 dB(A)
  • Inductive charging protects against wear and tear
  • Charging cradles can connect with one another, taking up minimal space
  • Size: 179 x 77 x 42 mm (7.0″ x 3.0″ x 1.7″)
  • Weight: 495 – 550 g (17.5 – 19.4 oz) Depending on sensor configuration and inclusion of pump
  • Ambient Conditions:
    • Temperature: – 20 to + 50 °C (-4 to 122°F)
    • Pressure: 700 to 1300 mbar (20.7 to 38.4 inch Hg)
    • Relative Humidity: 10 to 95 % r.h.
  • Protection Class: IP 67
  • Alarms:
    • Visual: 3 LED ‘red’ ; 3 LED ‘yellow’
    • Vibrating
    • Audible: Multi-tone, typically 100 dB(A) at 30 cm
  • Operating Times:
    • Typically 24h with With CatEx and 3 EC sensors
    • Typically 120h With 3 EC-sensors
  • Charging Time:  Typically 4 Hours
  • Data Storage:12 MB, e.g. at 10 minutes per hour of gas exposure with measuring values changing by the second on all 4 channels: Approx. 300 hours
Sensor Type Measuring Range Resolution
XXS H2S LC 0 – 100 ppm 0.1 ppm
XXS CO LC 0 – 2000 ppm 1 ppm
CatEx 125 (LEL) 0 – 100% LEL / 0 – 100%/vol 1% LEL/ 1.0 Vol%
XXS O2 0 – 25% 0.1%
XXS NO2 0 – 50 ppm 0.1 ppm
XXS SO2 0 – 100 ppm 0.1 ppm