X-AM® 2800

X-AM® 2800

Dräger Smart Safety Solutions

The X-AM 2800 multi-gas detector measures up to four gases and is equipped with a new shock-resistant CatEx sensor. Combined with the Dräger Gas Detection Connect software, the X-AM 2800 offers live data transmission, powerful fleet management, and the highest level of safety at a lower cost of ownership.

The newly developed Ex sensor found within the X-AM 2800 offers a number of advantages, including:

  • Readiness for calibration within seconds
  • Resistance to poisoning substances such as silicones and other harmful substances
  • Extreme robustness against shock
  • Ability to set the measurement gas to methane, propane, hydrogen, and a wide range of other gases.

Your advantage: sensors and devices are perfectly matched to each other — saving you operating costs.

The X-AM 2800 from Dräger, is comfortable to wear and has large buttons, making it easy to use even with gloves on. The display clearly shows important information such as gas readings and alarms. The optional green D-light indicates when the unit is ready for use, making the X-AM 2800 the next step in the evolution of Dräger’s gas detection line.

Powerful data analysis in the cloud

The X-AM 2800 increases safety and efficiency thanks to its networking capability. You can transfer your recorded data directly or via Bluetooth to a smartphone. From there, a quick transfer of that data to the backend of the Gas Detection Connect software and you are ready to go. Alternatively, you can also transfer the data directly to the cloud with the X-dock test station. This way, you have access to your data and its analysis at any time and from anywhere using your web browser.

Category: , ,

Tags:

  • 1 to 4 gas detection devic
  • Detection of flammable gases and vapours as well as O2, CO, NO2, SO2 and H2S
  • CatEx SR (Shock Resistant): Measures flammable gases and vapours. Very high resistance to shock loads.
  • Small and lightweight
  • Robust clip with D-ring on the backside fastens securely
  • Intuitive visual alarm: red for gas alarm, yellow for instrument errors
  • Robust design: IP 68 rating, withstands water and dust
  • Drop test > 2 m
  • Large buttons that can be operated even with gloves on
  • Dräger Gas Detection Connect supported

  • Size: 130 mm x 48 mm x 44 mm
  • Weight: 220 to 250 g
  • Display Type: Matrix display with high-resolution
  • Alarms:
    • Visual: 3 LED red (gas alarms); 3 LED yellow (device alarm)
    • Audible: Multi-ton > 90 dB at 30 cm
    • Vibration
  • Operating Time: Typical 12 h (Bluetooth active)
  • Charging Time: < 4 h
  • Operating Temperature: -20°C to 50°C
  • Pressure: 700 to 1300 mbar (Measurement)
  • Relative Humidity: 10 to 95% r.h.
  • Protection Class: IP68
  • Warranty: Four-Year Limited Warranty
  • Energy Supply: NiMH Battery (Rechargeable)
  • Bluetooth®: Bluetooth 5.0
  • Datalogger: Application of an optimized data compression method with high accuracy and large storage capacity.

Sensor Type Measuring Range Resolution
CatEX SR 0 - 100% LEL 1% LEL
XXS O2 0 - 25 %Vol 0.1%
XXS O2S PR 0 - 30 %Vol 0.1 %Vol
XXS CO LC 0 - 2,000 ppm 1 ppm
XXS H2S LC 0 - 100 ppm 0.1 ppm
XXS NO2 0 - 50 ppm 0.1 ppm
XXS SO2 0 - 100 ppm 0.1 ppm

Request a Demo

Schedule a demo with the experts at Electrogas to experience firsthand the innovative safety solutions we offer. Our team is dedicated to providing personalized demonstrations tailored to your specific needs and requirements.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.