ToxiRAE 3
ToxiRAE 3
The ToxiRAE 3 is a portable single-gas monitor designed to keep workers safe against the threat of carbon monoxide (CO) and hydrogen sulphide (H2S). Its high-performance, three-electrode sensor delivers a fast response time, combined with its water and dust-resistant housing, and three-alarm capability, it’s a valuable tool for ensuring workers are aware of the presence of CO or H2S.
KEY FEATURES
- Low cost of ownership
- Rugged dust-tight and waterproof housing
- Fastest instrument response time
- Fully featured single-gas monitor
- 0.1ppm resolution on Hydrogen Sulfide (H2S) sensor
- Large, easy-to-read display
- Lightweight, easy to wear and use
- Logs up to 10 events
- Water- and dust-resistant
- Audible, visual, and vibration alarm
- Carbon monoxide (CO) sensor
- Can record STEL, TWA, high and low alarms
- High-performance sensor for fastest possible response time
- Compatible with AutoRAE Lite bump test and calibration station
- Size: 3.4 x 2.2 x 0.8 in. / 8.6 x 5.5 x 2.0 cm
- Weight: 3.5 oz. / 99.4 g
- Response Time: T90 < 12 seconds
- Alarms:
- 95 dB typical (at 30 cm) buzzer and flashing red LED to indicate
exceeded preset limits - High: Displays “High” and emits 3 beeps and flashes per second
- Low: Displays “Low” and emits 2 beeps and flashes per second
- STEL: Displays “STEL” and emits 1 beep and flash per second
- TWA: Displays “TWA” and emits 1 beep and flash per second
- Vibration alarm
- 6-LED visible alarm
- 95 dB typical (at 30 cm) buzzer and flashing red LED to indicate
- Data logging: 10 events
- Battery: User-replaceable 2/3 AA high-capacity lithium
- Temperature: Continuous: -20º to +60ºC (-4º to 140ºF); Intermittent: -30º to +60ºC (-22º to 140ºF)
- Humidity: 0 to 95% relative humidity (non-condensing)
- Warranty: Two years, including sensor and battery if used within specifications
| Sensor Type | Measuring Range | Resolution |
|---|---|---|
| H2S | 0 – 100 ppm | 0.1 ppm |
| CO | 0 – 500 ppm | 1 ppm |
| CO (Ext. Range) | 0 – 1999 ppm | 1 ppm |
