Parat® Escape Hoods

PARAT® Escape Hoods

 In an emergency, Dräger’s PARAT® escape hoods can save your life. They protect you from toxic fumes and particles for up to 15 minutes—and they’re available in four different configurations.

 When you open the case, the filter automatically releases and moves into position so you can don the hood immediately. Its self-adjusting head harness requires no additional tightening.

The ABEK P3 filter reliably protects against a wide range of toxic industrial gases, vapours and particles. The filter is approved by DIN 58647-7 for filtering escape devices and tested in accordance with EN 14387:2004 for gas and combined filters.

Category: ,

Tags:

Parat Escape Hoods - Escape Hoods - Dräger - Electrogas

PARAT 4900 – Industrial Escape Hood

  • Use: protection against toxic industrial gases, vapors and particles
  • Filter: NIOSH OVesc. / SDesc. / HCesc. / HFesc. / AMesc. / HFesc. / CDesc. / HSesc. / MAesc. / R95
  • Approval: according to NIOSH 42 CFR Part 84, additionally tested for MV, Formeldehyde, and HCN.
  • Packaging types: available in Soft Pack only
Parat Escape Hoods - Escape Hoods - Dräger - Electrogas

PARAT 5500 – Fire Escape Hood

  • Use: protection against toxic fire-related gases, vapours and particles
  • Filter: CO P2 Filter
  • Approval: according to EN 403:2004 for fire escape hoods, additionally tested for the use against H2S (at 2,500 ppm) in accordance with DIN 58647-7
  • Packaging types: available in Hard Case, Soft Pack and Single Pack
Parat Escape Hoods - Escape Hoods - Dräger - Electrogas

PARAT 7500

  • Use: protection against toxic industrial gases, vapours, particles and fire-related gases
  • Filter: ABEK CO P3 Filter
  • Approval: according to EN 403:2004 for fire escape hoods; according to DIN 58647-7 for filtering escape devices; filter additionally tested in accordance with EN 14387:2004 for gas filter(s) and combined filter(s)
  • Packaging types: available in Hard Case and Soft Pack
    Alternatively available with an elastomeric neck seal for increased protection
Parat Escape Hoods - Escape Hoods - Dräger - Electrogas

PARAT Training Hood

  • Use: for training purposes
  • Filter: Hood comes with a filter dummy Packaging types: available in Hard Case, Soft Pack and Single Pack
  • Designed for protection against toxic fire-related gases, vapors and particles
  • Filter: CO P2 Filter
  • Escape hoods ready in 3 steps
  • High-performance combination filter reliably protects against a wide range of toxic industrial gases, vapors and particles
  • Replacing the filter after 8 years extends the service life of the to 16 years
  • Approvals: according to EN 403:2004 for fire escape hoods, additionally tested for the use against H2S (at 2,500 ppm) in accordance with DIN 58647-7
  • Packaging types: available in Hard Case, Soft Pack and Single Pack