Multi Gas Clip Pumped

Multi Gas Clip Pumped

A New Option in Portable Gas Detection

Twice a day, every day… that’s how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire work week without a charge. The MGC Pump follows in the long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.

Like our MGC, the MGC Pump uses low-power photometric technology to detect combustible gases (LEL) rather than age- old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.

Category: ,

Tags: ,

  • 5 day battery life (continuous run time)
  • 1 year calibration cycle
  • Will work in inert environments, no need for oxygen
  • Pull from over 75 feet
  • Stainless steel inlet
  • Size: 5.7” H x 3.0” W x 1.5” D (147 x 78 x 38.3 mm.)
  • Weight: 12.4 oz. (352g)
  • Temperature: -4 ̊ to +122 ̊F (-20 ̊ to +50 ̊C)
  • Humidity: 5% to 95% RH (non-condensing)
  • Battery Life: Infrared - 5 days continuous / Pellistor - 30 hours continuous
  • Charge Time: 4 - 6 Hours
  • Pump Draw: Sample from up to 75 ft. (23m)
  • Alarms:
    • Visual, vibrating & audible (minimum 95 dB)
    • Low, High, STEL, TWA & OL (Over Limit)
  • LEDs:
    • 4 Red alarm bar LEDs
    • Yellow back-light (activated on button press)
    • Red back-light (activated on alarm condition)
    • Yellow Maintenance Notification LED
  • Display: High viewing angle alphanumeric Liquid Crystal Display
  • Logs:
    • 25 Bump tests
    • 25 Events
    • 25 Calibrations
    • Continuous 1 second data logging, >2 month typical capacity
  • Tests:
    • Full function self-test upon activation
    • Sensors, battery and circuitry – continuous

User Options:

  • Custom user message
  • TWA/STEL intervals
  • Languages (6)
  • Latching alarms
  • Self-test lock
  • Auto-zero on start up
  • Bump test interval
  • Low/High alarm
  • Pump test
  • Maintenance notification
  • TWA method
  • Sensor enable/disable
  • SAFE display
  • Dock lock
  • Calibration gas percentage
  • Calibration interval
  • TWA/STEL alarm
  • % LEL or % by-vol
Sensor Type Measuring Range Resolution
H2S 0 – 100 ppm 0.1 ppm
CO 0 – 500 ppm 1 ppm
LEL 0 – 100% LEL 0.1%
O2 0 – 30% 0.1%