Multi Gas Clip Pump Infrared

Multi Gas Clip Pump Infrared

A New Option in Portable Gas Detection!

The Multi Gas Clip Pump Infrared follows in the long line of gas detectors by Gas Clip Technologies that have the longest battery life in the industry. Equipped with its internal sampling pump that can run 52 hours continuously without a charge.

The Secret to a Long Life is the use of a low-power photometric infrared technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last. The IR sensor also brings the benefit of not requiring calibration for 12 months. This is because IR is immune to pellistor sensor poisons such as silicone or H2S.

Note: The IR sensor can detect hydrocarbons. It cannot detect hydrogen or acetylene.

Category: ,


  • 52-hour continuous run time
  • 1-year calibration cycle
  • Will work in inert environments, no need for oxygen
  • Draws up to 75 feet
  • Stainless steel gas inlet
  • Ergonomic Design
  • Detects accurately in oxygen-depleted environments
  • Low maintenance cost - infrared LEL sensor is immune to poisons
  • Simple-to-use one-button operation
  • Large, easy-to-read screen
  • Lightweight & durable - alligator clip clamps on tight

  • Dimensions: 5.7” H x 3.0” W x 1.5” D (147 x 78 x 38.3 mm)
  • Weight: 12.4 oz. (352 g)
  • Temperature: -20˚ to +50˚C (4˚F to +122˚F)
  • Humidity: 5% to 100% RH (non-condensing)
  • Battery Life: Infrared version........52 hours (continuous); Pellistor version........12 hours (continuous)
  • Charging Time: 4 - 6 hours
  • Alarms: Visual, vibrating & audible (minimum 95 dB) Pump, Low, High, STEL, TWA & OL (Over Limit)
  • LEDs: 4 Red alarm bar LEDs; Yellow back-light (activated on button press); Red back-light (activated on alarm condition); Yellow maintenance notification LED
  • Display: High viewing angle alphanumeric Liquid Crystal Display (LCD)
  • Logs: 25 Bump tests, 25 events & 25 calibrations Continuous 1-second data logging (typical capacity > 2 months)
  • Tests: Full-function self-test upon activation Sensors, battery and circuitry tests run continuously
  • Gas Inlet: 1/8” Stainless steel barbed fitting
  • Pump Draw: Sample from up to 75 ft. (23 m)
  • Sample Delay Time: Less than 1 second per 1 ft. (0.3m) with 1/8 in. ID tubing
  • Warranty: Full 2-Years

Sensor Type Measuring Range Resolution
H2S 0 - 100 ppm 0.1 ppm
CO 0 - 500 ppm 1 ppm
LEL 0 - 100% LEL 0.1%
O2 0 - 30% 0.1%