GasAlert Micro5 Series

GasAlert Micro5 Series

Providing protection from up to five potential atmospheric hazards including oxygen, combustible, toxic gases, VOCs, and CO². The GasAlertMicro 5 is unparalleled in its versatility, capability and overall value. BW Technologies by Honeywell’s newest addition to its water-resistant line of portable gas detectors has transformed the market with its matchless array of features.

Choose from three detectors:

  • GasAlert Micro5: Standard (up to) 5 Gas Detector
  • GasAlert Micro5 IR: Used for Detection of VOCs
  • GasAlert Micro5 PID: Used for Detection of CO2

Category: , ,

Tags: , ,

  • Smaller and over 50% lighter than competitive instruments
  • Water-resistant design in an integral concussion-proof boot
  • Optional integral motorized pump option for remote sampling
  • Powered by three AA alkaline batteries or a hot-swappable rechargeable battery pack
  • Triple alarms (audible, visual and vibrating)
  • Provides 95 dB alarm tone and two bright wide-angled alarm bars
  • Multi-language support in English, French, German, Spanish and Portuguese
  • Large, user selectable backlit LCD
  • Four alarm levels: Low, High, TWA and STEL
  • Compatible with MicroDock II Automatic Test and Calibration Station
  • Datalogging models store and recall event information
  • Wide range of user selectable field options including password protection, safe and stealth modes
  • Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms
GasAlert Micro5 GasAlert Micro5 PID
GasAlert Micro5 IR
Gases Detected H2S; CO; O2; SO2; PH3; NH3; NO; HCN; Cl2; ClO2; O3; combustibles (LEL) VOCs (PID); H2S; CO; O2; SO2; PH3; NH3; NO; HCN; Cl2; ClO2; O3; combustibles (LEL) CO2 (IR); H2S; CO; O2; SO2; O3; combustibles (LEL)
Sensors
  • Plug-in, electrochemical cell (toxic and oxygen)
  • Catalytic (LEL)
  • Plug-in, electrochemical cell (toxic and oxygen)
  • Catalytic (LEL)
  • Photoionization detector (PID) with 10.6 eV lamp for volatile organic compounds (VOCs)
  • Plug-in, electrochemical cell (toxic and oxygen)
  • Catalytic (LEL)
  • Infrared (IR) for carbon dioxide (CO2)
Typical Battery Life Alkaline: 20 hrs
Rechargeable: 20hrs
Alkaline: 15 hrs
Rechargeable: 15 hrs
Alkaline: 15 hrs
Rechargeable: 15 hrs
  • Size: 5.7 x 2.9 x 1.5 in. / 14.5 x 7.4 x 3.8 cm
  • Weight: 13.1 oz. / 370 g
  • Temperature:
    • -4 to +122°F / -20 to +50°C
    • 14 to +104°F / -10 to +40°C (PID)
  • Ingress Protection: IP68
  • Alarms and Type:
    • Visual
    • Vibrating
    • Audible (95 dB)
    • Low, High, TWA, STEL, OL (over limit)
  • Self-Test: Sensor integrity, circuitry, battery and audible/visual alarms on activation, battery (continuous)
  • Pump: Optional; Sample from up to 66 ft. / 20 m
  • Ratings: EMI/RFI: Complies with EMC Directive 89/336/EEC IP 65/66
  • Warranty:
    • Full two year warranty including sensors
    • 1 year NH3, Cl2, O3, ClO2 and PID lamp
  • User Options:
    • Confidence beep
    • Set STEL interval
    • Set TWA method
    • Sensor on/off
    • Latching alarms
    • Safe display mode
    • Stealth mode
    • Adjust Clock
    • Set datalogger rate
    • Passcode protection
    • Correction factor library (LEL, PID)
    • Fast pump
    • Combustible gas measurement (% LEL or % by volume methane)
    • O2 auto calibration on start up
    • Automatic backlight
    • Sleep mode
    • User-settable calibration gas level
    • Calibration due lockout
    • Daily bump test
    • Language choices (five)
    • High resolution
Sensor Type Measuring Range Resolution (Highest)
H2S 0 – 100 ppm 1 ppm
CO 0 – 500 ppm 1 ppm
TwinTox (H2S) 0 – 500 ppm 0.1 ppm
TwinTox (CO) 0 – 500 ppm 1.0
O2 0 – 30% 0.1%
SO2 0 – 150 ppm 0.1 ppm
PH3 0 – 5.0 ppm 0.1 ppm
NH3 0 – 100 ppm 0.1 ppm
NO2 0 – 99.9 ppm 0.1 ppm
HCN 0 – 30.0 ppm 0.1 ppm
Cl2 0 – 50.0 ppm 0.1 ppm
ClO2 0 – 1.0 ppm 0.01 ppm
O3 0 – 1.0 ppm 0.01 ppm
PID (VOCs) 0 – 1000 ppm 1 ppm
IR (CO2) 0 – 50,000 ppm / 0 – 5.0% v/v 50 ppm / 0.01%
Combustible Gases 0 – 100% LEL / 0 – 5.0% v/v 1% / 0.1%